What Actually Drives the Ethyl Acetate Price
Ethyl acetate (EA), CAS 141-78-6, is a C4H8O2 ester with a formula weight of 88.11 g/mol, a boiling point of 77.1 °C, a density of 0.902 g/cm³ at 20 °C and a closed-cup flash point of about -4 °C. Two routes dominate commercial supply: catalytic esterification of acetic acid with ethanol, usually in a reactive-distillation configuration, and the Tishchenko reaction starting from acetaldehyde. In both routes the feedstock is the largest element of variable cost, so EA quotations track acetic acid and ethanol prices with a lag of a few weeks, and the spread between producers follows their feedstock position and energy efficiency. Steam for the column reboiler, plant utilisation and product logistics make up most of the balance, which is why the same specification can trade at noticeably different levels between regions and between contract and spot business.
Regional Price Indications
| Region | Indication (USD/kg, bulk) | Direction reported at the time |
|---|---|---|
| North America | 1.06 | Declining |
| Europe | 1.07 | Declining |
| Africa | 0.89 | Declining |
| Northeast Asia | 0.74 | Stable |
| South America | 0.87 | Declining |
| Middle East | 0.85 | Declining |
| India | 1.01 | Stable |
| China | 1.32 | Firm |
These figures are an indication snapshot recorded in late 2025, quoted in USD per kilogram on a bulk basis, and are shown to illustrate the regional spread rather than to serve as current quotations. The spread from the lowest to the highest region exceeds 0.5 USD/kg, which is wider than the conversion cost difference between producers; the gap is explained mainly by freight and duty, local supply length and the mix of contract versus spot volumes. When negotiating, the relevant comparison is always landed cost against the same specification, not the headline ex-works number.
Grades and How Specification Moves Price
Most industrial business is placed on a technical grade of 99.5% minimum assay, with water typically at or below 0.05% and acidity expressed as acetic acid at or below 0.005%. Urethane and coating consumers often specify a tighter water limit, and pharmaceutical or reagent users specify a further distilled grade. The accepted test methods are well established: water by Karl Fischer titration (ASTM D1364), acidity in volatile solvents (ASTM D1613), colour on the platinum-cobalt scale (ASTM D1209), distillation range (ASTM D1078) and specific gravity of liquid industrial chemicals (ASTM D891). Typical commercial values are specific gravity of about 0.900 to 0.905 at 20 °C, colour of 10 Pt-Co or better and non-volatile matter below 0.005%. Tightening any one of those limits costs an extra distillation or drying step, so the price step between a 99.5% grade and a 99.9% low-water grade is usually larger than the difference between two suppliers of the standard grade.
Packaging, Logistics and Landed Cost
Ethyl acetate is shipped in 200 L steel drums of about 180 kg net, in 1,000 L IBCs, in ISO tanks of roughly 20 to 24 tonnes and as bulk parcels. It is a class 3 flammable liquid, UN 1173, packing group II, so ordinary combustible-liquid segregation, earthing and bonding apply. Two logistics points affect both cost and quality. First, the product hydrolyses slowly in the presence of water, regenerating acetic acid, so drums and IBCs must be resealed immediately after sampling and tank vents protected from humid air; an in-transit acidity failure is a common cause of rejected lots. Second, because the material is volatile, drum handling, transfer losses and cleaning or return charges are real cost items, and they are frequently underestimated when a drum price is compared against an ISO-tank price.
Practical Sourcing Checklist
Fix the specification before requesting a price: assay, water, acidity, colour and non-volatile matter. Require a batch certificate of analysis and retention sample, and confirm which test methods the producer applies. Confirm packaging, net weight per drum and whether the price basis is ex-works, FOB, CFR or CIF, and whether tonnage is invoiced by mass or by volume. Check the agreed assay and acidity limits again on arrival, because the two properties most affected by transport are water and acidity. Finally, align delivery frequency with actual consumption: ethyl acetate held in drums for long periods is more likely to pick up moisture and to fail a specification established at the plant gate.
Frequently Asked Questions
Q: What determines the price of ethyl acetate solvent?
A: Feedstock cost is the dominant factor - acetic acid and ethanol for the esterification route, or acetaldehyde for the Tishchenko route - followed by energy, plant utilisation, and freight and duty to the delivery point.
Q: Why is ethyl acetate more expensive in some regions than others?
A: Regional supply length, freight and duty, and the mix of contract and spot sales create spreads that can exceed 0.5 USD/kg. Landed cost on an identical specification is the only valid comparison.
Q: What is the standard purity of industrial ethyl acetate?
A: Technical grade is normally 99.5% minimum assay, with water at or below 0.05% and acidity as acetic acid at or below 0.005%. Low-water urethane grades and further distilled grades are available at higher cost.
Q: Which test methods apply to ethyl acetate specifications?
A: Water by Karl Fischer titration (ASTM D1364), acidity in volatile solvents (ASTM D1613), colour on the platinum-cobalt scale (ASTM D1209), distillation range (ASTM D1078) and specific gravity (ASTM D891), with assay normally by gas chromatography.
Q: How should ethyl acetate be stored to protect quality?
A: Keep containers sealed and store in a cool, well-ventilated, bunded area away from ignition sources and oxidisers. Resealing after sampling and excluding humid air limit hydrolysis, which otherwise raises acidity and can fail the acceptance specification.





