Dipropylene Glycol Methyl Ether (DPM, CAS 34590-94-8): Uses in Coatings, Brake Fluids and Cleaners

Nov 27, 2024 Leave a message

Dipropylene glycol methyl ether, widely shortened to DPM and also sold as dipropylene glycol monomethyl ether, is a colourless, low-odour glycol ether with the CAS number 34590-94-8 and a molar mass of 148.20 g/mol. Technically the product is a mixture of closely related isomer structures formed when propylene oxide is reacted with methanol and then with propylene oxide again; the isomers behave so similarly that the commercial material is handled as a single solvent. DPM combines a moderate evaporation rate with complete water solubility and good solvency for resins, so it is one of the standard workhorses of coatings, brake fluids, cleaners and printing inks.

Typical Technical Data

The values below are the parameters most often quoted for technical grade DPM in drums.

Parameter Typical value
CAS number 34590-94-8
Molecular formula C7H16O3
Molar mass 148.20 g/mol
Appearance Colourless clear liquid
Odour Mild, pleasant
Boiling point about 188 °C at 101.3 kPa
Relative density about 0.95 at 20 °C
Flash point about 75 °C, closed cup
Water solubility complete, miscible with water and with most organic solvents

Because the flash point is well above ambient, DPM is not classified as a highly flammable liquid and can be stored and pumped in ordinary chemical warehousing. Purity is normally verified by gas chromatography, water content by Karl Fischer titration, and colour by the platinum-cobalt scale.

Role in Paints and Coatings

DPM is used in both water-borne and solvent-borne coatings, and the reason differs in each case.

Water-borne systems: as a coupling agent it bridges the water phase and the resin or pigment phase, giving a stable, lump-free dispersion and preventing the film from drying too quickly at the edges.

Solvent-borne systems: as an active solvent it dissolves the resin and controls the open time of the film, which improves flow, levelling and the final gloss.

Pigment pastes and dye solutions: it provides the consistency and storage stability needed for concentrates that must not settle or skin.

Resin manufacture: it helps control viscosity during the reaction, so the batch stays pumpable and reproducible.

Formulators also value the slow evaporation rate: because DPM leaves the film later than faster solvents, it keeps the coating mobile long enough for brush marks and spray defects to flow out.

Brake Fluid and Functional Fluids

Brake fluids must work over a very wide temperature range and must not boil when brake callipers get hot. Glycol ethers such as DPM are used as a component of the fluid package, where they contribute to the required viscosity behaviour and keep additive components dissolved. Its ability to hold a stable, homogeneous blend at both low and elevated temperatures is the reason it appears in wet-boiling-point formulations and in other hydraulic and heat-transfer media.

Cleaners, Degreasers and Printing Inks

In household and industrial cleaning products DPM acts as both solvent and coupling agent, allowing greasy, oily soil to be lifted while the formulation still dilutes cleanly with water. It is found in multi-purpose cleaners, metal cleaners, hard-surface cleaners, and paint and grease removers. In the printing sector it is used as a slow tail solvent in gravure and flexographic ink systems and as a primary solvent in screen printing inks, where it keeps the ink flowing evenly on the press and prevents the printed image from drying on the plate. It is also used as a coupling agent in blends for water-based gravure, flexographic and screen inks, and in dye liquors for vat dyeing of textiles.

Cosmetics and Agrochemical Formulations

In personal care products DPM works as a mutual solvent and coupling agent: it dissolves ingredients that are otherwise hard to combine, such as fragrances and some active substances, and helps them stay evenly distributed in the base. In crop protection formulations it improves the stability of emulsifiable concentrates and suspension concentrates and helps keep the active ingredient in solution during spraying.

Frequently Asked Questions

Q: What is dipropylene glycol methyl ether used for?
It is used as a solvent and coupling agent in paints and coatings, as a component of brake fluids and functional fluids, in household and industrial cleaners, in gravure, flexographic and screen printing inks, in textile dyeing, in cosmetics and in agrochemical formulations.

Q: What is the CAS number of DPM?
Dipropylene glycol methyl ether has the CAS number 34590-94-8 and the molecular formula C7H16O3.

Q: Is DPM miscible with water?
Yes. DPM dissolves completely in water and also mixes with most common organic solvents, which is why it works as a coupling agent between water and resin phases.

Q: Is DPM the same as dipropylene glycol monomethyl ether?
Yes. The two names describe the same substance and the same CAS number 34590-94-8; DPM is simply the standard industry abbreviation.

Q: What is the flash point of DPM?
About 75 °C by closed cup measurement, so it is not a highly flammable liquid and does not require the same storage precautions as low-boiling ethers.

Q: Which grade of DPM is normally traded in bulk?
Technical grade material with a purity of about 99% measured by gas chromatography is the normal bulk grade, supplied in drums and ISO tanks for coatings, cleaning and ink applications.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry