Chemical Identity and Reactivity Profile
2-Chloro-5-cyanopyridine is a disubstituted pyridine carrying a chlorine atom at the 2-position and a nitrile group at the 5-position. Its molecular formula is C6H3ClN2 and its formula weight is 138.55 g/mol, from 6 x 12.011 (carbon), 3 x 1.008 (hydrogen), 35.45 (chlorine) and 2 x 14.007 (nitrogen). The CAS Registry Number is 33252-28-7 and the material is supplied as a white to off-white crystalline solid. The two substituents are electronically different, and that difference is the reason the molecule is commercially useful. The nitrile is electron-withdrawing, so it activates the ring, and the chlorine at the 2-position sits in a position that is susceptible to nucleophilic aromatic substitution. Amines, alkoxides and thiols therefore displace the chlorine under moderate conditions to give 2-substituted 5-cyanopyridines, while the nitrile can be hydrolysed to a carboxylic acid, reduced to an aminomethyl group, or converted to amidine and related derivatives.
Use in Pharmaceutical Intermediates
The largest use of 2-chloro-5-cyanopyridine is as a building block for active pharmaceutical ingredients and their advanced intermediates. The 5-cyanopyridin-2-yl unit is a recurring pharmacophore, and the chlorine provides a clean handle for attaching the amine or ether side chain that carries the biological activity. Typical transformations are amination with primary or secondary amines to build 2-aminopyridine-5-carbonitrile cores, alkoxylation, and palladium-catalysed cross-coupling to install aryl or heteroaryl groups at the 2-position. The nitrile is often retained through the coupling sequence and then elaborated at a later stage, which is convenient for route design because it tolerates a wide range of reaction conditions. Process chemistry groups select this starting material when they want a short, high-yielding route with a crystalline, easily purified intermediate rather than a long linear sequence. Material intended for pharmaceutical use should be produced under the principles of ICH Q7, with documented batch records, change control and impurity profiling.
Use in Crop Protection and Specialty Chemistry
Cyanopyridine intermediates are also used in crop protection chemistry, where the nitrile-bearing pyridine ring appears in herbicide and fungicide actives and in their intermediates. In specialty chemistry the same scaffold serves as a ligand precursor and as a monomer for functional materials, because the nitrile can be converted into amidine, tetrazole or primary amine groups that change solubility and coordination behaviour. The 2-halo-5-cyano pattern is particularly useful for constructing 2,5-disubstituted pyridines in a defined order: react the chlorine first, then transform the nitrile, or the reverse if the nitrile must survive an acidic coupling step.
Typical Commercial Specification
| Parameter | Typical value |
|---|---|
| Assay (by GC) | 98.0% minimum, higher grades to 99.5% |
| Appearance | White to off-white crystalline powder |
| Water content | 0.5% maximum (Karl Fischer, ASTM D1364) |
| Individual unspecified impurity | 0.5% maximum |
| Isomeric chlorocyanopyridines | Controlled by GC, typically 0.5% maximum |
| Residue on ignition | 0.1% maximum |
| Packing | 25 kg fibre drum with inner polyethylene liner |
Assay and isomer distribution are established by gas chromatography using the packed-column practice of ASTM E260; liquid chromatography is used when a non-volatile impurity profile is required. Sampling of industrial chemical lots follows ASTM E300. Because the isomers are chemically similar, chromatographic resolution and a qualified reference standard matter more than the headline assay figure, and buyers should request a chromatogram with the certificate of analysis rather than a single number.
Storage, Handling and Safety
The nitrile function means that acid or base hydrolysis can release ammonia and, under strongly acidic conditions, hydrogen cyanide must be considered in risk assessment. Keep the material away from strong acids, strong bases, strong oxidisers and moisture, store in a cool, dry, well-ventilated area out of direct light, and keep containers closed. Nitrile rubber gloves, chemical splash goggles and dust control are appropriate for handling; engineering controls should prevent dust generation during drum emptying and reactor charging. Because the compound is a solid with limited solubility in water, cleaning of equipment should use a solvent that dissolves it, and washings should be routed to the correct waste stream.
Frequently Asked Questions
Q: What is 2-chloro-5-cyanopyridine used for?
A: It is mainly a pharmaceutical and agrochemical intermediate. The chlorine is displaced by amines or alkoxides to give 2-substituted 5-cyanopyridines, and the nitrile is later hydrolysed, reduced or cyclised to build the target molecule.
Q: What is the CAS number and molecular weight of 2-chloro-5-cyanopyridine?
A: CAS 33252-28-7, molecular formula C6H3ClN2, formula weight 138.55 g/mol.
Q: Which reaction is faster, substitution of the chlorine or transformation of the nitrile?
A: The chlorine at the 2-position is activated towards nucleophilic aromatic substitution by the nitrile, so amination or alkoxylation normally proceeds first, which allows the nitrile to be carried through the coupling step.
Q: How is the purity of 2-chloro-5-cyanopyridine controlled?
A: Assay and isomer distribution are normally determined by gas chromatography under ASTM E260, water by Karl Fischer titration under ASTM D1364, and lot sampling per ASTM E300, with a chromatogram issued alongside the certificate of analysis.
Q: What are the main storage precautions?
A: Keep it cool, dry and out of direct light, exclude acids, bases, oxidisers and moisture, and control dust during handling. Hydrolysis in the presence of strong acid or base must be evaluated for ammonia and hydrogen cyanide release.





