The density of p-xylene (para-xylene) is approximately 0.86 g/mL at 20°C, equivalent to about 0.86 g/cm³. The exact value may vary slightly with temperature and measurement conditions.

P-Xylene Density
p-Xylene has a density of approximately 0.86 g/mL at 20°C. p-Xylene, also known as para-xylene, is an aromatic hydrocarbon with the molecular formula C₈H₁₀ and CAS No. 106-42-3.
| Property | Value |
|---|---|
| Chemical Name | p-Xylene (Para-Xylene) |
| CAS Number | 106-42-3 |
| Molecular Formula | C₈H₁₀ |
| Molecular Weight | 106.16 g/mol |
| Density at 20°C | Approximately 0.86 g/mL |
| Density | Approximately 0.86 g/cm³ |
| Melting Point | Approximately 13.3°C |
| Boiling Point | Approximately 138°C |
| Appearance | Colorless liquid |
【View p-Xylene Product Details】
These are reference physical-property values. The specification for a commercial product may vary slightly depending on purity, temperature, and test method.
What Is the Density of p-Xylene in g/cm³?
The density of p-xylene is approximately 0.86 g/cm³ at 20°C. This is numerically the same as 0.86 g/mL because 1 mL equals 1 cm³.
p-Xylene is therefore less dense than water, which has a density of approximately 1.0 g/mL at room temperature.
Does p-Xylene Density Change With Temperature?
Yes, the density of p-xylene changes with temperature. As temperature increases, p-xylene expands slightly and its density decreases. Therefore, density values should be compared at the same reference temperature.
This is particularly relevant when converting between mass and volume for storage, filling, or bulk transportation. A density value without a reference temperature may not be directly comparable with another value.
P-Xylene Density for Industrial Purchasing
For industrial purchasing, buyers should confirm the density together with the product's purity and test temperature. When checking a specific commercial grade or batch, the supplier's COA or TDS should be used as the primary specification reference.
For an RFQ, buyers can specify:
- Product: p-Xylene / Para-Xylene
- CAS No.: 106-42-3
- Required purity
- Quantity
- Packaging
- Destination
If density is an important specification for the application, the required test temperature and specification range should also be stated.
Frequently Asked Questions
What Is the Density of p-Xylene?
The density of p-xylene is approximately 0.86 g/mL at 20°C.
What Is p-Xylene Density in g/cm³?
p-Xylene has a density of approximately 0.86 g/cm³ at 20°C, which is numerically equivalent to 0.86 g/mL.
Is p-Xylene Denser Than Water?
No. p-Xylene is less dense than water. Its density is approximately 0.86 g/mL at 20°C, while water is approximately 1.0 g/mL at room temperature.
What Is the CAS Number of p-Xylene?
The CAS number of p-xylene (para-xylene) is 106-42-3.
Is p-Xylene a Liquid at Room Temperature?
p-Xylene is generally a liquid above its melting point of approximately 13.3°C. At temperatures below its melting point, pure p-xylene can solidify, which should be considered during storage and transportation.
Sourcing p-Xylene
TIANJIN GNEE BIOTECH CO., LTD. supplies p-xylene (CAS 106-42-3) for industrial buyers. Contact us for the current product specification, COA, packaging options, availability, and quotation. [ Get a Free Quote ]





