What is the chemical name for DMC?

May 13, 2025 Leave a message

The chemical name for DMC is dimethyl carbonate, registered under CAS number 616-38-6, with the molecular formula C₃H₆O₃. It is one of the most widely traded carbonate ester solvents in the global chemical market, used as a lithium battery electrolyte solvent, a green methylating agent, and an eco-friendly substitute for toluene and xylene. Buyers sourcing dimethyl carbonate for battery-grade electrolyte, industrial solvents, or organic synthesis will typically see it listed under names such as DMC, carbonic acid dimethyl ester, or methyl carbonate.

 

 

How the Name "Dimethyl Carbonate" Is Constructed

 

The name directly reflects the molecule's structure: "di-" means two, "methyl" refers to the -CH₃ group, and "carbonate" describes the central carbon bonded to three oxygen atoms. In the dimethyl carbonate molecule, a central carbon atom forms one double bond with an oxygen atom and two single bonds with two other oxygen atoms; each of these single-bonded oxygens is further attached to a methyl group. This gives the structural formula CH₃OCOOCH₃, or in canonical SMILES notation: COC(=O)OC. Because the name follows IUPAC systematic nomenclature, any chemist or procurement specialist can derive the molecular structure directly from the name - an important detail when verifying dimethyl carbonate specifications against a Certificate of Analysis (COA).

 

 

Molecular Identity and Database Reference Numbers

 

Dimethyl carbonate has a molecular weight of 90.08 g/mol and is indexed under PubChem CID 12021, ChemSpider ID 11526, and EC number 210-478-4. Additional identifiers include ChEBI:36596 and UNII KE9J097SPN. These reference numbers are useful for procurement teams cross-checking supplier documentation, customs declarations, or REACH/ECHA compliance records (ECHA InfoCard 100.009.527), since product names and trade terms can vary between manufacturers while the CAS number and molecular identifiers remain constant.

 

Dimethyl Carbonate (DMC)

 

Dimethyl Carbonate Physical and Chemical Properties

 

Dimethyl carbonate is a colorless, transparent liquid with a boiling point of 90°C, a melting point of 2-4°C, and a density of approximately 1.07 g/cm³. Buyers evaluating dimethyl carbonate specifications for battery-grade or industrial-grade applications commonly reference the following data:

 

Property Value
Boiling point 90°C (at 760 mmHg)
Melting point 2-4°C
Density 1.069–1.073 g/cm³ (20-25°C)
Flash point 17-18°C (closed cup)
Refractive index ~1.368–1.369
Vapor pressure ~55.4 mmHg (25°C)
Water solubility 13.9 g/100 mL
Appearance Colorless, transparent liquid, mild odor

 

These figures are compiled from publicly available chemical databases (Wikipedia, ChemicalBook, PubChem) and may vary slightly by batch and purity grade; buyers should always confirm final specifications against the supplier's COA and SDS before purchase.

 

 

Safety Classification and Handling for Bulk Purchase

 

Dimethyl carbonate is classified as a flammable liquid, with an NFPA 704 fire diamond rating of 1-3-1 and GHS hazard statement H225 (highly flammable liquid and vapor). Given its relatively low flash point (17-18°C), dimethyl carbonate for export or bulk shipment must be stored and transported under flammable-goods protocols, away from heat and ignition sources, with proper grounding/bonding during transfer (GHS precautionary statements P210, P233, P240-P243). Compared with traditional methylating agents such as methyl iodide or dimethyl sulfate, dimethyl carbonate is considered significantly less toxic and readily biodegradable - a key reason it is increasingly specified in green chemistry and REACH-compliant formulations.

 

 

Common Synonyms and Trade Names

 

In procurement and trade documentation, dimethyl carbonate is commonly listed as DMC, carbonic acid dimethyl ester, or methyl carbonate. One term to be cautious of is "methoxyformic anhydride" - this is not a recognized or standard synonym for dimethyl carbonate, and buyers cross-referencing product literature should rely on the IUPAC name "dimethyl carbonate" or the CAS number 616-38-6 to avoid confusion when comparing quotes from multiple suppliers.

Industrially, dimethyl carbonate is now produced primarily via oxidative carbonylation of methanol (using carbon monoxide and oxygen as feedstock), which has largely replaced the older, phosgene-based production route. This shift is one reason dimethyl carbonate is frequently marketed as an environmentally preferable solvent and intermediate.

 

 

Dimethyl Carbonate Grades and Purity Specifications for Buyers

 

Commercial dimethyl carbonate is typically sold in battery grade (≥99.9% purity), premium grade (≥99.5%), and first grade (≥99.0%), each with different moisture and impurity tolerances. Battery-grade dimethyl carbonate - the specification required for lithium-ion battery electrolyte solvent applications - demands especially strict control of water content (typically ≤30 ppm) and non-volatile residue, since even trace moisture can compromise electrolyte performance. Buyers sourcing dimethyl carbonate for electrolyte manufacturing should always request batch-specific COA data confirming purity, water content, and acidity/alkalinity before confirming an order.

 

 

Key Applications Driving Global Demand

 

The three primary applications of dimethyl carbonate are lithium battery electrolyte solvent, green methylating/carbonylating agent in organic synthesis, and low-toxicity industrial solvent. In the battery and new energy sector, dimethyl carbonate is valued for its dielectric properties and electrochemical stability in electrolyte formulations. In organic chemistry, it serves as a safer substitute for phosgene and dimethyl sulfate in methylation and carbonylation reactions. In coatings, adhesives, and cleaning formulations, dimethyl carbonate is increasingly used to replace toluene, xylene, and other VOC-regulated solvents, supporting compliance with environmental regulations in many export markets.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry