tert-Butyl Acrylate (CAS 1663-39-4): Uses, Properties and Storage

May 28, 2025 Leave a message

What Is tert-Butyl Acrylate?

tert-Butyl acrylate (CAS 1663-39-4), usually abbreviated to TBA, is the ester formed from acrylic acid and tert-butanol. It is a colourless liquid with a characteristic pungent, sweet odour, a molecular formula of C7H12O2 and a molar mass of 128.17 g/mol. Because the acrylate double bond is highly reactive, the material polymerises readily and is therefore always supplied with a polymerisation inhibitor and stored within controlled temperature limits.

The distinguishing feature of TBA is the bulky tert-butyl side group. Compared with methyl or butyl acrylate it stiffens the polymer backbone, improves resistance to water, acids and ultraviolet light, and provides a site that can be cleaved under heat or acid to release acrylic acid functionality. Those three characteristics explain the monomer's position in coatings, adhesives and plastics.

Properties and Typical Specification

Property Typical value
Chemical name tert-Butyl prop-2-enoate
Abbreviation TBA
CAS number 1663-39-4
Molecular formula C7H12O2
Molar mass 128.17 g/mol
Appearance Clear, colourless liquid
Odour Characteristic pungent, sweet acrylic odour
Density About 0.88 g/cm³ at 20 °C
Boiling point About 118-120 °C
Flash point Approximately 21-25 °C, closed cup
Water solubility Slightly soluble
Inhibitor Methyl ether of hydroquinone, typically 10-200 ppm as supplied
Typical purity 99 percent minimum by gas chromatography

Two specification points deserve attention. First, the flash point is close to ambient temperature, so the material is a flammable liquid and must be handled accordingly. Second, water content and acidity must be kept low, because free acrylic acid accelerates corrosion in storage and can disturb polymerisation control.

Coatings and Paints

In the paint and coatings industry TBA is a key comonomer. Polymers built with TBA give films excellent flexibility and durability, allowing the coating to expand and contract with temperature swings without cracking or peeling. This makes the monomer particularly suitable for exterior architectural paints and automotive finishes, where the film must withstand sunlight, rain and repeated thermal cycling. TBA also helps the coating resist chipping and fading, so the appearance holds for longer. In thermally curing systems the tert-butyl group can be designed to leave during baking, generating reactive acid functionality that crosslinks with melamine or epoxy resins and improves hardness and solvent resistance.

Adhesives and Sealants

TBA is widely used in adhesives. Its polymers bond strongly to paper, plastic, wood and metal, and the bulky side group raises tack and peel strength while improving resistance to water and ageing. In packaging manufacture, adhesives containing TBA keep cartons and cases sealed during transport and storage, and in pressure-sensitive applications the monomer helps balance initial tack against cohesive strength. Sealants and caulks benefit from the same combination of flexibility and weather resistance.

Plastics, Textiles and Other Uses

Plastics - used to modify properties and raise impact resistance, so moulded parts such as toys, electronic housings and household items are less likely to crack when dropped or knocked.

Textiles - polymers based on TBA are applied as fabric finishes that make fabrics water-repellent, stain-resistant or softer and smoother to the touch, improving clothing, upholstery and technical textiles.

Coatings for leather and paper - the same resins add flexibility and water resistance to surface finishes.

Chemical intermediates - the monomer serves as a building block in acrylic resin synthesis and in the preparation of functionalised acrylic polymers.

Storage, Handling and Polymerisation Control

TBA is a flammable liquid and an aggressive sensitiser, so all transfers should be made in closed systems with grounding and bonding, away from ignition sources. Store in original, tightly closed containers, preferably under a nitrogen blanket, at moderate temperature and out of direct sunlight. Because the inhibitor needs dissolved oxygen to work, storage under a blanket of air rather than inert gas is sometimes preferred; if nitrogen is used, the inhibitor level and re-inhibition schedule must be checked. Prolonged storage below 5 °C can cause phase separation, and prolonged storage above 30 °C can exhaust the inhibitor and trigger self-polymerisation.

Personal protection should include chemical-resistant gloves, goggles and appropriate respiratory protection when vapours are not adequately controlled by ventilation. Bulk deliveries are made in stainless steel road tankers or intermediate bulk containers, with smaller volumes supplied in lined drums.

FAQ

Q: What is tert-butyl acrylate used for?
It is used to make polymers and resins for paints and coatings, adhesives, plastics and textile finishes, and it also serves as an intermediate in acrylic chemistry.

Q: Why is tert-butyl acrylate preferred in exterior paints?
Its bulky side group gives films flexibility, water resistance and ultraviolet stability, so the coating expands and contracts with temperature changes without cracking, chipping or fading.

Q: What is the CAS number and formula of TBA?
The CAS number is 1663-39-4 and the molecular formula is C7H12O2, with a molar mass of 128.17 g/mol.

Q: Is tert-butyl acrylate hazardous to store?
Yes. It is a flammable liquid with a flash point of roughly 21-25 °C and can self-polymerise if the inhibitor is depleted or the temperature rises too high, so storage temperature, inhibitor level and container closure must be controlled.

Q: How should tert-butyl acrylate be stored?
Keep it in tightly closed containers out of direct sunlight, ideally between 5 °C and 30 °C, with inhibitor present and oxygen access adequate for the inhibitor system. Avoid ignition sources, oxidisers and contamination.

Q: Can tert-butyl acrylate be blended with other acrylic monomers?
Yes. It copolymerises readily with methyl methacrylate, butyl acrylate, styrene and other vinyl monomers, which is how formulators tune toughness, flexibility and water resistance for a specific application.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry