What Is Lauryl Dimethyl Amine Oxide (CAS 1643-20-5)?
Lauryl dimethyl amine oxide, also written lauramine oxide, LDAO or N,N-dimethyldodecylamine N-oxide, is an amphoteric surfactant built on a C12 lauric alkyl chain. Its polar amine oxide head group changes character with pH: it behaves as a cationic species in acidic media, becomes effectively non-ionic in neutral and alkaline media, and carries no permanent charge. That pH-flexible behaviour, rather than raw detergency, is the reason formulators use it as a foam booster, viscosity builder and mildness modifier rather than as a stand-alone cleaning agent.
Commercial material is normally a clear, colourless to pale yellow aqueous liquid supplied at 30% active matter. It dissolves readily in water, tolerates hard-water ions, and works alongside anionic surfactants such as alkyl ether sulfates, alpha-olefin sulfonates and soaps, as well as with quaternary ammonium compounds and most non-ionic surfactants. Odour is low, which matters in products where perfume loadings must stay low for label or skin-sensitivity reasons.
Typical Properties and Specification Data
| Property | Typical value |
|---|---|
| Chemical name | N,N-dimethyldodecylamine N-oxide |
| CAS number | 1643-20-5 |
| Molecular formula | C14H31NO |
| Molecular weight | about 229.4 g/mol |
| Appearance, 30% grade | colourless to pale yellow clear liquid |
| Active matter | 30% plus or minus 1 |
| pH of a 1% aqueous solution | 6.5 to 7.5 |
| Free amine | 0.5% maximum |
| Hydrogen peroxide | 0.2% maximum |
| Density at 20 degrees C | about 0.98 to 0.99 g/cm3 |
| Solubility | readily soluble in water and polar solvents |
| Surface activity | anionic, non-ionic and cationic compatible |
| Biodegradation | readily biodegradable under aerobic conditions |
The figures above describe standard liquid grades and are indicative only; a batch certificate of analysis governs each delivery. Paste and high-activity solid grades are also produced where a concentrated surfactant stream is required by the downstream process.
How the Amine Oxide Group Performs in Formulation
Foam boosting: additions of one to five percent active matter raise foam volume and, more importantly, foam persistence in the presence of sebum, cooking oil and hard-water ions.
Viscosity response: the elongated mixed micelles it forms with anionic surfactants thicken a formulation, so less sodium chloride or polymeric thickener is required to reach a target viscosity.
Mildness: its amphoteric character lowers the irritation potential of the anionics it is paired with, which is why it appears in products for babies and for sensitive skin.
Wetting and emulsification: it reduces surface tension and helps aqueous cleaners wet oily, dusty or metal surfaces instead of beading on them.
Robustness: activity is retained from acidic through alkaline pH, in oxidising systems such as hypochlorite cleaners, and in the presence of enzymes and chelating agents.
Applications Across Personal Care, Home Care and Industry
Personal care. In shampoos, shower gels, facial cleansers and hand soaps it acts as a mild co-surfactant that builds creamy, stable lather and leaves skin feeling soft rather than tight. Because irritation scores are low, it is also used in baby washes, intimate hygiene products and medicated cleansers.
Household cleaning. Dishwashing liquids, kitchen degreasers, bathroom and toilet cleaners use it for grease removal and as a foam stabiliser, so the surfactant film stays on vertical ceramic and stainless-steel surfaces long enough to lift soil.
Industrial and metal cleaning. In industrial cleaning it improves surface wetting and disperses oily contamination. It is added to metalworking fluids, spray cleaners, floor-care systems and CIP detergents to raise cleaning power without attacking aluminium or painted surfaces.
Adjacent uses. It serves as a stabiliser in emulsion polymerisation, a wetting agent in textile processing and an antistatic or emulsifying aid in crop-care and hard-surface formulations.
Handling, Storage and Environmental Profile
The product is a mild skin and eye irritant in concentrated form, so gloves and eye protection are normal practice when drums or intermediate bulk containers are decanted. It is not classified as flammable. Store between 5 and 35 degrees C in tightly closed original packaging; the liquid gels or separates if allowed to freeze, and although it recovers on warming and stirring, repeated freeze-thaw cycles are best avoided. Shelf life in unopened drums is typically twenty-four months.
From an environmental standpoint the amine oxide chain degrades by beta-oxidation and the molecule is classed as readily biodegradable, with low bioaccumulation potential and low aquatic toxicity at use concentrations. That profile is what allows it to be used in products carrying green and eco-label claims.
Frequently Asked Questions
Q: What is lauryl dimethyl amine oxide used for?
It is used mainly as a mild foam booster, viscosity builder and grease-cutting co-surfactant in personal care, household cleaning and industrial or metal cleaning formulations.
Q: Is it anionic, cationic or non-ionic?
It is amphoteric. The amine oxide head group is cationic in acidic solution, non-ionic in neutral and alkaline solution, and it is compatible with all three surfactant classes.
Q: What is the difference between LDAO and DDAO?
The C12 lauric chain gives LDAO, CAS 1643-20-5. DDAO uses a C10 decyl chain and a different CAS number, so the two are not interchangeable in a registered formulation.
Q: How much is normally used in a formulation?
Typical loadings are one to five percent active matter as a foam booster, and up to ten percent where it acts as the primary mild surfactant in a baby or sensitive-skin product.
Q: Is it compatible with hypochlorite bleach?
Yes, within its stability window. It is routinely used to thicken and stabilise chlorine-based bathroom and toilet cleaners, but the finished product should be checked for colour and viscosity drift over time.
Q: How should it be stored?
Keep it in closed original packaging between 5 and 35 degrees C, away from direct sunlight and frost, and use it within twenty-four months for best colour and odour performance.





