Ferric Stearate (Iron(III) Stearate, CAS 555-36-2): Properties and Uses

May 26, 2025 Leave a message

What Is Ferric Stearate?

Ferric stearate, also called iron(III) stearate, is the iron salt of stearic acid - a metal soap of a saturated C18 fatty acid. It is normally supplied as a light brown to reddish-brown powder with a faint fatty odour, insoluble in water and soluble in warm oils and organic solvents. The molecule contains three stearate chains bound to one ferric centre, so a high proportion of the mass is hydrocarbon and the product behaves as a waxy, surface-active solid rather than as a classic inorganic iron salt.

Property Typical value
CAS number 555-36-2
Synonym Iron(III) stearate
Structure Iron(III) salt of stearic acid, Fe(C18H35O2)3
Molecular weight About 906 g/mol
Theoretical iron content About 6.2 percent by weight
Appearance Light brown to reddish-brown powder
Solubility Insoluble in water; partly soluble in warm organic solvents and oils
Thermal behaviour Softens and decomposes on strong heating rather than distilling unchanged

Because the iron centre is trivalent, ferric stearate differs from the more common divalent soaps such as calcium, magnesium or zinc stearate. That difference in oxidation state is what makes it useful as an oxidation promoter in drying oils and, at the same time, a potentially colour-active additive in light-coloured compounds.

Lubricant and Stabiliser in Plastics and Rubber

In plastics processing ferric stearate performs two related functions: it acts as a lubricant and release aid, and it contributes to heat and light stabilisation. As a lubricant it reduces friction between the polymer melt and the metal surfaces of the processing equipment, so extruder torque falls, output becomes steadier and the surface finish of the finished part improves. It behaves partly as an internal lubricant, improving flow inside the melt, and partly as an external lubricant that migrates to the interface.

Typical addition level: about 0.1-1.0 parts per hundred resin, set by the flow and release behaviour actually achieved on the line

Processing routes: extrusion of pipe, profile and sheet, injection moulding of containers and technical parts, calendering

Effect on output: lower melt viscosity, fewer surface defects, easier ejection from moulds and less die build-up

Stabilisation: helps limit degradation and colour drift caused by heat and light during processing and service

Rubber and elastomers: used as a processing lubricant and mould release aid in compounded stocks

Thermal behaviour of the compound can be followed by differential scanning calorimetry in line with ISO 11357-3 to confirm melting and crystallisation temperatures of the polymer system, and lubricant level is normally fixed by trials that balance flow against print, welding and adhesion requirements.

Driers in Paints and Coatings

Drying is the second major outlet. Alkyd and oil-based paints cure by oxidative crosslinking, and that reaction needs a metal catalyst. Iron soaps such as ferric stearate act as driers that accelerate the uptake of oxygen and the subsequent polymerisation of the binder, so a film that would otherwise stay tacky for a long time hardens to a dry, handleable surface. Drying and film formation times are assessed by methods such as ASTM D1640.

Iron driers are usually classified as secondary or auxiliary driers and are combined with a primary drier system, because on their own they cannot drive the whole curing reaction. They are valued for promoting through-drying and hardening of thick films, and for improving the drying performance of coatings applied at low temperature or high humidity. Two practical limitations should be respected: iron soaps can darken pale and white coatings, so they are used mostly in primers, industrial maintenance paints, dark colours and wood stains; and the dosage must stay low, because excess iron accelerates embrittlement and can shorten the service life of the film. Because ferric stearate is a solid, non-volatile powder it is easier to handle in solvent-free and high-solids systems than liquid cobalt or manganese driers, and it does not introduce the odour associated with some organic drier solutions.

Cosmetics, Personal Care and Speciality Uses

In cosmetics and personal care ferric stearate works as an emulsifier and thickener. In creams and lotions a metal soap of this type helps oil-based and water-based phases stay together in a uniform, stable emulsion, and it raises the consistency of the product so that it feels richer and holds its shape in the jar. Because the stearate part is a common cosmetic raw material, the salt is also used in make-up, powders and anhydrous sticks where it contributes body, adhesion to skin and a smooth application feel.

Lubricant and anti-caking aid in powder and pressed powder products

Rheology modifier in anhydrous sticks, balms and cream formulations

Speciality chemical use as a catalyst or catalyst precursor in organic reactions

Dispersing and lubricating additive in pigment and filler masterbatches

Grades intended for cosmetic use are supplied with tighter control on heavy metals and on odour than technical grades, and formulators should confirm that the selected grade complies with the cosmetic regulation of the destination market before it is introduced into a formula.

Specification, Packaging and Handling

Ferric stearate is not a single fixed commodity, and buyers should agree the specification by lot rather than by trade name alone. Iron content is the key parameter, because it is the active part of the molecule.

Parameter Typical commercial requirement
Iron content About 6.0-6.5 percent by weight
Free fatty acid 1 percent maximum, expressed as stearic acid (acid value by ISO 660)
Moisture 2 percent maximum
Appearance Uniform light brown powder, free from lumps and foreign matter
Fineness Fine powder, commonly passing a 200 mesh screen

Iron content is normally verified by complexometric titration or by inductively coupled plasma optical emission spectrometry after acid digestion, and the free fatty acid level is checked by titration to ISO 660. The product is packed in 25 kg multi-wall paper bags with a PE liner, or in 500-1,000 kg big bags, and should be stored in a sealed, dry warehouse away from strong oxidising agents, moisture and odour-sensitive goods. As a fine metal-soap powder it should be handled with local dust extraction, and dust inhalation and prolonged skin contact should be avoided; empty bags and spills should be swept up rather than washed into drains. Shelf life in unopened packaging is typically about 24 months.

Frequently Asked Questions

Q: What is ferric stearate used for?
A: It is used as a lubricant and release aid plus heat and light stabiliser in plastics and rubber, as a drier in oil-based paints and coatings, and as an emulsifier and thickener in cosmetics and personal care.

Q: What is the CAS number of ferric stearate?
A: CAS 555-36-2; it is the iron(III) salt of stearic acid, Fe(C18H35O2)3, with a molecular weight of about 906 g/mol.

Q: How much ferric stearate is added to a plastics compound?
A: Typically 0.1-1.0 parts per hundred resin, adjusted on trial to give the required melt flow, release behaviour and surface finish.

Q: Why is ferric stearate used as a paint drier?
A: Alkyd and oil binders cure by oxidation, and the trivalent iron centre catalyses oxygen uptake, so the film hardens and dries through more quickly, especially in thick coats.

Q: Can ferric stearate be used in white or light-coloured coatings?
A: Its iron content can cause discolouration, so it is normally reserved for primers, dark colours, wood stains and industrial maintenance coatings rather than pale topcoats.

Q: How is ferric stearate analysed and stored?
A: Iron content is determined by titration or inductively coupled plasma optical emission spectrometry and free fatty acid by titration to ISO 660; store the powder sealed and dry, away from oxidisers, for up to about 24 months.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry