What Calcium Carbonate Is
Calcium carbonate is the inorganic salt with the formula CaCO3 and CAS Registry Number 471-34-1. It occurs naturally as limestone, chalk, marble and aragonite shell, and it can also be manufactured by carbonating a lime slurry. The commercial material is a white, odourless powder, granule or slurry that is chemically stable under normal conditions and reacts with acids to release carbon dioxide. Three anhydrous polymorphs exist: calcite, aragonite and vaterite, with calcite being the stable form at ambient temperature. Two production routes dominate supply: ground calcium carbonate (GCC), produced by dry or wet milling of natural stone, and precipitated calcium carbonate (PCC), produced by controlled carbonation and used where fine, uniform particles and high brightness are required.
Physical and Chemical Properties
| Property | Typical value |
|---|---|
| Chemical formula | CaCO3 |
| CAS number | 471-34-1 |
| Molar mass | 100.09 g/mol |
| Appearance | white powder, granules or aqueous slurry |
| Specific gravity (calcite) | 2.71 g/cm3 |
| Mohs hardness | 3 |
| Solubility in water at 25 C | about 15 mg/L |
| Decomposition to CaO and CO2 | begins near 825 C |
| Theoretical calcium content | 40.0 % |
Industrial Applications
In papermaking, calcium carbonate is used both as a wet-end filler and as a coating pigment. Alkaline papermaking grades raise brightness, opacity and bulk while lowering fibre cost. In plastics, GCC and PCC are added at loadings commonly between 10 and 40 parts per hundred resin to increase stiffness, hardness and dimensional stability of PVC profiles, pipes and cable compounds; stearic-acid coated grades reduce moisture uptake and improve dispersion. In paints and coatings, the material acts as an extender that partly replaces titanium dioxide and improves film opacity, matting and scrub resistance. Construction consumes the largest tonnage: limestone is the primary raw meal for Portland cement clinker, a graded aggregate for concrete, and a sorbent in flue-gas desulfurisation, where it captures sulphur dioxide as gypsum. Metallurgical grades serve as a flux in iron and steel making and in non-ferrous smelting.
Food and Feed Applications
Food-grade calcium carbonate is listed as the additive E170 in the European Union, is described in the Food Chemicals Codex monograph, and is covered by the Chinese national food safety standard GB 1886.214 for food additive calcium carbonate. Its functions in food systems include calcium fortification of beverages, flours and dairy alternatives; anti-caking in powders and seasoning blends; acidity regulation; and firming of canned vegetables. In animal nutrition it is the standard calcium source in mineral premixes and is dosed against the calcium-to-phosphorus ratio of the complete feed. Purity requirements for the food and feed grades cover heavy metals, arsenic, fluoride and lead at the low mg/kg level, and the material must be free of visible foreign matter.
Pharmaceutical Applications
In solid dosage forms calcium carbonate serves as a diluent and filler for direct compression and as a mild alkaline excipient for effervescent systems, where it releases carbon dioxide on contact with acid. As an active ingredient it is used as an antacid and as a phosphate binder in patients with chronic kidney disease. The United States Pharmacopeia monograph limits the assay to 98.5-100.5 % calculated on the dried basis, and the same monograph specifies limits for magnesium and alkali salts, heavy metals, arsenic and acid-insoluble substances. One gram of pure calcium carbonate supplies 400 mg of elemental calcium, a conversion used when calculating supplement strength and label claims.
Grades, Specifications and Quality Control
Pigment grades are classified by ASTM D1199, which separates Type PC (precipitated) from Type GC (ground mineral product) and divides each type into six grades according to particle size and residue. Fine grades for coating and ink applications typically show a median particle size (d50) between 0.7 and 3 microns and a top cut below 10 microns, measured by sedimentation or laser diffraction. ISO 3262-1 gives the general test methods for extenders, ISO 3262-4 covers whiting, ISO 3262-5 natural crystalline calcium carbonate and ISO 3262-6 precipitated calcium carbonate. Calcium carbonate content is normally determined by complexometric titration, and the physical tests for carbonate raw materials follow the procedures of ASTM C110. Whiteness, moisture, oil absorption, sieve residue and coated versus uncoated surface treatment are the routine release parameters for bulk buyers.
Handling and Storage
Calcium carbonate is not classified as a hazardous substance for transport and is generally treated as a nuisance dust. Bulk shipments are supplied in 25 kg multi-wall bags, 500-1000 kg jumbo bags, or bulk tankers for slurries. Warehouses should be dry, because moisture causes caking and screen residue, and the material should be kept away from acids and from aluminium or ammonium salt powders. Dust from fine grades is controlled with local exhaust ventilation and dust masks; a workplace exposure limit for inhalable particulate is normally applied. Slurry products require gentle agitation to prevent settlement and must be protected from bacterial growth during storage.
Frequently Asked Questions
Q: What is calcium carbonate mainly used for?
A: The largest volumes go to construction (cement raw meal, aggregate), paper filler and coating, plastics and paint fillers, desulfurisation sorbents, and food or pharmaceutical grades used as a calcium source.
Q: What is the difference between GCC and PCC?
A: GCC is ground natural limestone or marble and retains the crystal shape of the deposit. PCC is chemically precipitated calcium carbonate, which gives a more uniform particle size distribution and higher brightness at a higher cost.
Q: How much elemental calcium does calcium carbonate contain?
A: Calcium carbonate is 40.0 % calcium by mass, so 1 g of the pure compound provides 400 mg of elemental calcium.
Q: Is calcium carbonate hazardous for transport?
A: No. It is not classified as dangerous goods. The practical risks are dust inhalation and, for slurries, slip hazards and biological growth in storage.
Q: Which documents should accompany a bulk shipment?
A: A certificate of analysis covering assay, whiteness, moisture, sieve residue and heavy metals, plus a safety data sheet, is the standard documentation set for industrial and food grades.
Q: How should calcium carbonate be stored?
A: In a dry, closed warehouse away from acids, with bagged material stacked on pallets and slurry tanks kept under mild agitation.





