N,N-Dimethylsulfamoyl Chloride (CAS 13360-57-1): Uses in Synthesis and Handling

Apr 22, 2025 Leave a message

Chemical Identity and Physical Properties

N,N-Dimethylsulfamoyl chloride (CAS 13360-57-1) is a reactive organosulfur compound of formula (CH3)2NSO2Cl. The molecule combines a dimethylamino group with a sulfamoyl chloride function, and its reactivity comes from the strongly electrophilic sulfur centre, which makes it a convenient vehicle for transferring the dimethylsulfamoyl group to nucleophiles such as alcohols, phenols and amines. It is a low-viscosity, colourless to pale yellow liquid that is supplied and stored as a moisture-sensitive fine-chemical intermediate.

Parameter Typical value
Chemical name N,N-Dimethylsulfamoyl chloride (dimethylsulfamoyl chloride)
CAS number 13360-57-1
Molecular formula (CH3)2NSO2Cl
Molecular weight 143.59 g/mol
Appearance Colourless to pale yellow liquid
Density Approximately 1.34 g/cm3 at 20 °C
Solubility Miscible with dichloromethane, chloroform, toluene, tetrahydrofuran and acetonitrile
Reactivity Hydrolyses on contact with water and alcohols, releasing hydrogen chloride
Storage Sealed, under dry inert gas, cool and protected from moisture

The functional group is small but electronically powerful. Once attached to a molecule, the sulfamoyl unit is strongly electron-withdrawing, and this changes acidity, hydrogen-bonding behaviour and crystallinity of the resulting compound. Organic chemists therefore use the reagent both to build active ingredients and to fine-tune the physical properties of a development candidate.

Why the Dimethylsulfamoyl Group Is Valued

In medicinal chemistry the dimethylsulfamoyl group is used to raise aqueous solubility without adding a permanently charged centre, to occupy a polar pocket in a binding site, and to block metabolic soft spots that would otherwise shorten the half-life of a drug. Because the group can be installed late in a synthetic sequence under mild conditions, it is also a practical tool for building structure-activity series quickly during lead optimisation.

In agrochemistry the same properties translate into better systemic movement inside the plant or the target organism, improved rainfastness of the active ingredient, and more favourable partition behaviour between water and the waxy leaf surface. These effects explain why the reagent appears repeatedly in the patent literature for crop-protection actives.

Pharmaceutical and Agrochemical Applications

Pharmaceutical intermediates: preparation of sulfonamide antibacterials, thiazide-type diuretics and other diuretic actives, carbonic-anhydrase inhibitors and kinase-targeting candidates under development.

Peptide and nucleotide modification: attachment of sulfamoyl tags for bioconjugation, assay development and prodrug design.

Sulfonylurea herbicides: manufacture of actives such as chlorsulfuron and metsulfuron-methyl, which inhibit acetolactate synthase, a key enzyme in plant branched-chain amino-acid biosynthesis.

Insecticide and fungicide intermediates: introduction of the sulfamoyl unit to adjust lipophilicity and systemic activity of the active ingredient.

Veterinary and specialty actives: small-volume synthesis of sulfamoyl-containing compounds for animal-health applications.

Polymer, Materials and Specialty Chemistry Uses

Beyond life sciences, the reagent is used to modify synthetic macromolecules. Reaction with hydroxyl or amine groups on polyesters, polyurethanes and acrylic resins introduces sulfamoyl linkages that can raise mechanical strength, solvent resistance or adhesion of a coating. In surfactant chemistry it produces amphiphilic structures in which the sulfamoyl unit supplies the hydrophilic character while the methyl substituents contribute lipophilic balance, giving emulsifiers, wetting agents and oil-field additives.

A second specialty outlet is electronic materials. Aryl sulfamates prepared from phenols and this reagent are used as components of photoresist and imaging systems for semiconductor manufacturing, where their solubility switching behaviour is valued. The compound also serves as a precursor to sulfamoyl fluorides through halogen exchange, and sulfamoyl fluorides are intermediates in several fluorination protocols and in electrolyte-related research.

Finally, it is a standard reagent for sulfamoylation in laboratory and pilot-plant work: it converts alcohols, phenols and amines into sulfamates, sulfamides and sulfur-containing heterocycles that are otherwise difficult to reach, and it is widely applied in building screening libraries for high-throughput discovery.

Reactivity, Safety and Industrial Handling

Because the sulfamoyl chloride function reacts readily with water and alcohols, the compound must be treated as a moisture-sensitive and corrosive material. Contact with water generates hydrogen chloride and dimethylsulfamic acid derivatives, so hydrolysis is exothermic and produces a strongly acidic medium. Gases evolved during charging, sampling and reaction should be captured by an alkali scrubber, and transfer operations should use corrosion-resistant equipment such as glass-lined reactors, PTFE-lined lines and appropriate gaskets.

Handle in a well-ventilated fume hood or closed system under dry nitrogen or argon.

Wear chemical-resistant gloves, goggles with a face shield and protective clothing; the material causes severe skin and eye burns.

Never quench residues with water directly; hydrolyse slowly into a cooled, agitated vessel with scrubbing in place.

Keep away from strong oxidisers, alkalis and amine-rich streams that could react exothermically.

Maintain spill kits with inert absorbent and neutralising agent at the point of use.

Process hazard reviews for scale-up should treat the reaction as a fast, exothermic acylation-type step. Controlled addition rates, jacket cooling and adequate headspace venting are the usual safeguards when the reagent is reacted with a substrate in a solvent such as dichloromethane or toluene at low temperature.

Quality Control, Packaging and Supply

Typical purchase specifications cover assay by gas chromatography, moisture content by Karl Fischer titration, free chloride and acidity, and colour. Material is generally supplied at a purity of 98% or above, in glass bottles for laboratory quantities and in lined steel or polyethylene drums for bulk orders. Each lot is accompanied by a certificate of analysis and a safety data sheet.

Control parameter Method Purpose
Assay Gas chromatography Confirms the content of active reagent
Moisture Karl Fischer titration Predicts hydrolytic loss and HCl formation
Acidity Titrimetric Monitors decomposition during storage
Colour Visual or platinum-cobalt scale Indicates purity and handling history

Warehouse practice should follow first-in, first-out rotation, keep drums under nitrogen whenever they are resealed, and avoid storage above the temperature range recommended by the producer. Shipments are normally packed with adequate absorbent, and containers are labelled to reflect both the corrosive hazard and the moisture sensitivity of the contents.

Frequently Asked Questions

Q: What is N,N-dimethylsulfamoyl chloride used for?
It is a sulfamoylation reagent used to introduce the dimethylsulfamoyl group into pharmaceuticals, agrochemical actives, polymers, surfactants and electronic materials.

Q: What are the CAS number and molecular formula?
The CAS number is 13360-57-1 and the molecular formula is (CH3)2NSO2Cl, corresponding to a molecular weight of 143.59 g/mol.

Q: Why must the reagent be kept away from water?
It reacts with water and alcohols to release hydrogen chloride, which is corrosive and can damage equipment; the reaction is also exothermic, so moisture control is a safety requirement as well as a quality requirement.

Q: How is the dimethylsulfamoyl group used in herbicide synthesis?
It is incorporated into sulfonylurea actives that inhibit acetolactate synthase, blocking branched-chain amino-acid biosynthesis in susceptible weeds.

Q: What purity and packaging are typical for bulk supply?
Material is typically supplied at 98% purity or higher by gas chromatography, in glass bottles for laboratory quantities and in lined steel or polyethylene drums for bulk orders, each with a certificate of analysis.

Q: Which materials of construction are suitable?
Glass-lined reactors, PTFE-lined pipework, and corrosion-resistant gaskets are preferred because the reagent and its hydrolysis products attack ordinary carbon steel and many elastomers.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry