Lauryl Dimethylamine Oxide (CAS 1643-20-5) Side Effects and Safe Use

Jun 23, 2025 Leave a message

Product Identity and Supplied Form

Lauryl dimethylamine oxide, commonly abbreviated LDAO, is a long-chain amine oxide surfactant with CAS number 1643-20-5 and the molecular formula C14H31NO, molecular weight 229.40 g/mol. In the standard nomenclature it is N,N-dimethyldodecylamine N-oxide, the C12 homologue of the alkyl dimethylamine oxide family. The pure substance is a waxy solid, but it is almost never traded that way: commercial material is a 30 % aqueous solution, a clear to slightly hazy pale yellow liquid that is easy to pump and blend.

The molecule carries a semi-polar N-oxide group that is strongly hydrophilic and a C12 alkyl chain that is hydrophobic, which is the structural reason for its behaviour. At neutral and alkaline pH the group is non-ionic in character; in acid conditions it is protonated and behaves as a weak cationic surfactant. That pH-dependent character is why LDAO is described as amphoteric and why it pairs so well with anionic surfactants, where it acts as a foam booster and viscosity builder without the incompatibility problems of a permanent cation.

Typical Specification of a 30 % Solution

Parameter Typical value Method
Appearance Clear to slightly hazy, colourless to pale yellow liquid Visual
Active matter 30 % ± 1 % w/w Titrimetric (two-phase)
Free amine ≤ 0.5 % w/w Titration
Residual hydrogen peroxide ≤ 0.3 % w/w Iodometric
pH, as supplied Near neutral to mildly alkaline pH meter, 10 % dilution
Colour ≤ 100 Hazen (Gardner 2 maximum) Colour comparison
Solidification point Below 0 °C for the 30 % solution Cooling curve

Free amine is the specification item that matters most in practice. It is the unoxidised precursor left after the hydrogen peroxide step, and a high residue raises pH, adds amine odour and can react with anionic actives or with fragrance components. Residual peroxide likewise has to be controlled, because it bleaches dyes and attacks some preservatives in the finished formulation.

Performance in Cleaning and Personal Care Formulations

LDAO is dosed at 1 to 5 % of the finished formulation, most often as a secondary surfactant. Its four main functions are foam generation and stabilisation, viscosity building, hard-water tolerance and mildness. The foam benefit comes from the bulky head group and the long chain, which together slow drainage of the lamellae around the bubbles, so foam volume holds up in the presence of sebum and oily soil. The viscosity benefit comes from the formation of elongated mixed micelles with anionic sulfates and sulfonates, giving a higher viscosity at the same total active content.

As a lime-soap dispersant the oxide keeps calcium and magnesium salts of fatty acids suspended rather than deposited on fabric, skin or hard surfaces, which is valuable in hand dishwashing liquids and in hard-water areas. Because the molecule is amphoteric and is not a permanent cation, it is also stable in oxidising systems, including hypochlorite and hydrogen peroxide based cleaners, where many quaternary ammonium actives would be destroyed.

Irritation, Environmental and Handling Data

Concentrated amine oxide solutions are strong eye irritants and are classified as causing serious eye damage, with skin irritation on prolonged contact. In finished retail products the active level is far below the irritation threshold, which is why the material is regarded as a mild surfactant in use; in the plant, dilution, face shields or goggles, gloves and prompt washing after handling are the basic controls. Spilled concentrate is slippery and should be flushed with plenty of water and contained rather than washed straight to drain, because the material is toxic to aquatic life; a fully diluted, ready-biodegradable effluent is a different case from a neat spill.

On the environmental side, amine oxides are readily biodegradable. In standard ready-biodegradability screening of the OECD 301 series, including the 301B carbon dioxide evolution test, the material typically clears the 60 % mineralisation threshold well inside 28 days, which is the reason it is widely accepted in detergents. Acute and chronic aquatic toxicity data are generated against OECD guideline 202 for Daphnia and OECD guideline 203 for fish, and the concentrate is classified for aquatic hazard under Regulation (EC) No 1272/2008 accordingly. Biodegradation should not be confused with absence of toxicity, however: the same molecule that degrades quickly in a treatment plant can still harm aquatic life in an undiluted release.

For skin and eye endpoints, suppliers and formulators generate data to OECD guideline 404 and guideline 405, and preservative efficacy of the finished cosmetic product is normally demonstrated under ISO 11930, with manufacture under the good manufacturing practice framework of ISO 22716. Amine oxide is itself a weak antimicrobial, but it is not a substitute for a properly validated preservative system.

Storage and Compatibility

The 30 % solution is stored in plastic, stainless steel or glass-lined vessels at ambient temperature, protected from freezing and from prolonged exposure to air. Stainless steel and polyethylene are the usual materials of construction; unlined carbon steel and aluminium should be avoided, and iron contamination causes colour pickup. Concentrate that has been chilled and frozen can be re-liquefied by warming to about 30 to 40 °C and stirring gently; repeated freeze-thaw cycles are best avoided because they can separate the mixture.

Compatibility notes for the formulator: LDAO is compatible with anionic sulfates, sulfonates, betaines, amphoacetates, non-ionics and with hypochlorite systems. It can form complexes with some anionic dyes and with strong acids such as sulfonic acids, and in strongly acidic conditions below pH 4 it behaves as a cation, which changes the interaction profile with anionic actives and thickeners. Water hardness is tolerated rather than chelated by the oxide, so a sequestrant is still required where scale control is the objective.

Frequently Asked Questions

Q: What is the CAS number and formula of lauryl dimethylamine oxide?
A: The CAS number is 1643-20-5, the formula is C14H31NO and the molecular weight is 229.40 g/mol, corresponding to N,N-dimethyldodecylamine N-oxide.

Q: Is LDAO amphoteric or non-ionic?
A: It is best described as amphoteric. It behaves as a non-ionic surfactant at neutral and alkaline pH because of the semi-polar N-oxide group, and is protonated to a cationic form in acidic conditions below roughly pH 4.

Q: What are the main side effects of the material?
A: Concentrates cause serious eye damage and skin irritation on prolonged contact, and the compound is toxic to aquatic organisms. In retail products the active level is low enough that the material is considered a mild surfactant in normal use.

Q: Is lauryl dimethylamine oxide biodegradable?
A: Yes. It is readily biodegradable in OECD 301 screening tests such as the 301B CO2 evolution method, typically exceeding the 60 % mineralisation threshold within 28 days. Rapid biodegradation does not remove the need to contain neat spills.

Q: Why is it used with anionic surfactants?
A: It boosts and stabilises foam, increases viscosity through mixed micelle formation, improves hard-water tolerance as a lime-soap dispersant, and reduces the irritation profile of the anionic active it is paired with.

Q: How should a 30 % solution be stored?
A: In stainless steel, polyethylene or glass-lined vessels at ambient temperature, kept closed and protected from freezing. Frozen material can be recovered by warming to 30 to 40 °C and stirring until uniform.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry