Vanillyl Butyl Ether: What the Molecule Is and Where It Sits in the Catalogue
Vanillyl butyl ether is a synthetic aromatic ether built on the vanillin skeleton. Formally it is 4-(butoxymethyl)-2-methoxyphenol, registered under CAS 82654-98-6, with the molecular formula C12H18O3 and a molecular weight of 210.27 g/mol. In the personal care industry it is listed by its INCI name, Vanillyl Butyl Ether, and it is purchased almost entirely as a sensory ingredient: a mild, long-acting warming agent for leave-on skin products.
Buyers regularly confuse vanillyl butyl ether with three neighbouring materials sharing the same 2-methoxyphenol core: vanillin (CAS 121-33-5), vanillyl alcohol (CAS 498-00-0) and the shorter-chain homologue vanillyl ethyl ether. They differ substantially in volatility, odour threshold, physiological effect and price, and they are not interchangeable in a formulation. Vanillin is a high-impact flavouring and fragrance aldehyde; vanillyl alcohol is a crystalline intermediate used mainly as a building block; vanillyl ethyl ether is a milder, more volatile warming agent. Only vanillyl butyl ether combines low pungency with a sensory signal that persists for hours, which is the property formulators pay for.
Chemically the molecule is an alkyl ether of a substituted benzyl alcohol: the benzylic hydroxyl of vanillyl alcohol is capped by a butyl group, leaving the phenolic hydroxyl free. That free phenol is the reason the material behaves as a weak acid, reacts with strong alkali to form a phenolate, and is incompatible with oxidising and strong alkaline environments. It is also the reason the material should be protected from light and air during long storage.
Physicochemical Properties Relevant to Formulation
Vanillyl butyl ether is a colourless to pale yellow viscous liquid at room temperature with a faint, sweet, vanilla-like odour. It is essentially oil-soluble: practically insoluble in water, readily soluble in ethanol, isopropanol and the common cosmetic emollients and triglyceride oils used in emulsions. That solubility profile determines how it is incorporated in practice - it is added to the oil phase, not to the water phase.
The substance has a relatively high boiling point and therefore negligible vapour pressure under ambient conditions; commercial purification is carried out by vacuum distillation rather than by any high-temperature process. The combination of very low water solubility, low volatility and a free phenolic group makes it a cosmetic-grade material that must be protected from alkaline additives, metal ions and prolonged UV exposure to avoid discolouration.
From a sensory standpoint, the defining property is that topical application produces a gradual, diffuse sensation of warmth rather than a sharp sting. The effect is mediated through the same transient receptor potential channel family that responds to natural pungent compounds, but the onset is slower and the intensity far lower than that of capsaicin-class materials. It does not produce the burning, blistering or intense irritation associated with conventional rubefacients at normal use levels.
Identity and Typical Commercial Specification
The table below summarises the identity data and the specification parameters that a technical buyer normally writes into a purchase order for cosmetic-grade material. Values quoted as ranges are ordinary commercial ranges rather than figures for one specific supply lot; the assay and water limits are the two items that most often decide acceptance.
| Parameter | Typical value or limit | Method / basis |
|---|---|---|
| Chemical name | 4-(butoxymethyl)-2-methoxyphenol | IUPAC nomenclature |
| CAS number | 82654-98-6 | CAS registry |
| INCI name | Vanillyl Butyl Ether | INCI dictionary |
| Molecular formula | C12H18O3 | calculated from structure |
| Molecular weight | 210.27 g/mol | calculated from structure |
| Appearance | colourless to pale yellow viscous liquid | visual inspection |
| Odour | faint sweet vanilla-like | organoleptic panel |
| Assay | 98.0% minimum | gas chromatography, external standard |
| Water content | 0.5% maximum | Karl Fischer titration |
| Solubility | insoluble in water; soluble in ethanol and cosmetic oils | pharmacopoeial solubility scheme |
| Heavy metals | 10 mg/kg maximum | ICP-OES after wet digestion |
| Residue on ignition | 0.1% maximum | gravimetric |
| Packaging | 1 kg / 5 kg sample packs, 25 kg and 200 kg lined drums | commercial practice |
| Storage | tightly closed, protected from light, 5-30 C | good manufacturing practice |
Two practical notes follow from this table. First, water content is specified because residual water in an oil-soluble phenol accelerates both discolouration and acid-value drift. Karl Fischer titration is the accepted reference method for water in this class of product. Second, sampling should follow a documented procedure such as the general rules for sampling chemical products, and the retain sample should be kept for the full shelf-life period so that any sensory complaint can be traced back to a documented lot.
Manufacturing Route and Supply-Chain Position
Vanillyl butyl ether belongs to the group of vanillin derivatives, so its supply chain begins with the vanillin family. The industrial sequence is a Williamson-type etherification in which the benzylic hydroxyl of vanillyl alcohol is alkylated, followed by isolation and purification of the ether by vacuum distillation. Because the phenolic hydroxyl is far more acidic than the benzylic hydroxyl, selectivity is achieved by controlling the reaction conditions and the order of addition rather than by protecting groups in most commercial routes.
This positioning matters to buyers for two reasons. First, the material is one step downstream of vanillyl alcohol, so availability and pricing track the vanillin and vanillyl alcohol markets. Second, the free phenolic group means the finished ether is sensitive to alkaline conditions and to traces of iron and copper; suppliers who handle the product in glass-lined or passivated stainless equipment deliver a more colour-stable lot than those using unpassivated carbon steel.
Vanillyl butyl ether is not a dangerous good in the sense used for explosives, highly toxic or strongly corrosive substances, and it is not a controlled precursor. It is supplied as a standard industrial chemical with a safety data sheet prepared according to ISO 11014, and it is handled with ordinary chemical hygiene: local exhaust ventilation, nitrile gloves, safety goggles and prompt removal from skin.
Applications in Cosmetics and Personal Care
The dominant commercial use of vanillyl butyl ether is as a warming agent in leave-on skin products. Typical formulation types include body and slimming gels, firming and contouring creams, massage oils, warming balms, muscle comfort products, scalp and hair treatments and self-heating masks. In an oil-in-water emulsion the material is dissolved in the oil phase before emulsification; in anhydrous gels it is dissolved in the alcohol or glycol carrier. Typical use levels in leave-on products are in the range of about 0.05% to 0.5%, with the exact figure set by the desired onset time and the sensitivity of the intended consumer group.
Two formulation habits are worth preserving. First, the perceived warmth is a function of dose and of occlusion: a warming gel applied under a wrap will feel considerably stronger than the same concentration applied to bare skin, so pilot trials should always reproduce the intended application geometry. Second, because the effect is receptor-mediated rather than a chemical heating reaction, it does not raise skin temperature by a measurable amount in the way an exothermic mineral system does. Products that promise a temperature rise are generally built on a different chemistry.
Beyond warming claims, the material also functions as a mild fragrance component. Its vanilla-toned odour allows it to be used at low levels as a modifier in fragrance compositions for soaps, gels and creams, where it blends with vanillin, ethyl vanillin and other sweet balsamic notes. In this role it is judged on odour quality rather than on physiological effect, and it is normally used at only a few hundred parts per million.
Some suppliers also list vanillyl butyl ether for oral and flavouring applications. Any such use has to be justified against the flavouring legislation of the destination market - in the European Union the framework is Regulation (EC) No 1334/2008 on flavourings and certain food ingredients with flavouring properties, and in the United States the corresponding framework for synthetic flavouring substances is set out in 21 CFR 172.515. A flavouring substance must appear on the applicable list to be used for that purpose, and a food or oral grade also requires a food-contact-compliant packaging and a documented allergen and heavy-metal control. Buyers sourcing for oral use should obtain the grade specifically declared for that purpose rather than assuming that a cosmetic-grade lot is acceptable.
Warming Agents Compared: Why the Choice Matters
Vanillyl butyl ether competes in a small family of sensory warming and rubefacient ingredients. The comparison table below sets out the trade-offs that drive selection. The physiologically active substances in this family are handled under the general safety provisions for cosmetic ingredients, and the pungent natural materials are subject to specific concentration limits in the markets that regulate them, so the table should be read as a selection guide rather than as a compliance statement for any individual market.
| Ingredient | CAS number | Sensory character | Typical role |
|---|---|---|---|
| Vanillyl butyl ether | 82654-98-6 | slow onset, long-lasting, diffuse warmth, low pungency | leave-on warming claim, 0.05-0.5% |
| Vanillyl ethyl ether | not applicable | shorter chain homologue, milder and more volatile effect | gentle warming, fragrance modifier |
| Nonivamide | 2444-46-4 | synthetic capsaicinoid, rapid and intense heat with pronounced pungency | analgesic and rubefacient products, tightly dosed |
| Capsaicin | 404-86-4 | natural pungent principle, strong burning sensation | topical analgesic preparations |
| Methyl salicylate | 119-36-8 | counter-irritant, warming-cooling overlap | liniments and muscle rubs |
| Methyl nicotinate | 93-60-7 | vasodilator, flushing warmth | rubefacient in massage products |
The practical conclusion is straightforward. Where the brief calls for a pleasant, sustained sensation that a consumer will describe as pleasant warmth rather than as burning, vanillyl butyl ether is the usual choice. Where a strong and rapid pharmacological effect is wanted, formulators move to the capsaicinoid family and accept the corresponding irritation, restriction and labelling consequences.
Safety, Regulatory Handling and Documentation
Vanillyl butyl ether is not classified as a flammable liquid, and it is not an oxidiser, a corrosive or an acutely toxic substance in normal industrial handling. Because it is a phenolic ether with a low vapour pressure, exposure control focuses on skin contact during weighing and dispensing rather than on inhalation. The standard controls are local exhaust ventilation at the dispensing station, nitrile gloves, safety spectacles or goggles, a lab coat or coverall, and immediate washing with soap and water after contact. Eye contact should be rinsed with plenty of water.
On the compliance side, three documents normally travel with a shipment. The first is the safety data sheet, which should be prepared to the ISO 11014 structure and carry the GHS classification, pictograms and precautionary statements that apply in the destination jurisdiction. The second is a certificate of analysis giving the assay, water content and the tests requested in the specification. The third, for cosmetic use, is the INCI declaration together with the information a formulator needs for the product information file required by Regulation (EC) No 1223/2009 in the European Union, and for the equivalent safety assessment documentation required elsewhere.
Market-specific points deserve attention. In the European Union the material is handled as a cosmetic ingredient under Regulation (EC) No 1223/2009 and is not used as a preservative, colorant or UV filter, so the annexes for those functions do not apply. Cosmetic products placed on the Chinese market require registration or filing with the competent authority and must satisfy the Safety and Technical Standards for Cosmetics, including microbiological and heavy-metal limits for the finished product. In the United States, cosmetic facilities and products are subject to the registration and listing requirements introduced by the Modernization of Cosmetics Regulation Act framework.
Where the intended use is fragrance composition for consumer products, the applicable IFRA Standards must be checked and the fragrance house's certificate retained, because a restriction can apply to the finished fragrance even when it does not apply to the individual raw material.
Storage, Stability, Packaging and Transport
Vanillyl butyl ether should be stored in tightly closed original containers, protected from direct sunlight and kept in a cool, dry, well-ventilated area away from strong oxidising agents and strong alkalis. Recommended storage temperatures are ambient to moderately warm conditions, avoiding repeated freeze-thaw cycling. Under these conditions an unopened container typically retains specification for at least twenty-four months; the retest period should be stated on the certificate of analysis.
Because the material is oil-soluble and not water-miscible, spill response is mechanical: absorb the liquid with inert material such as vermiculite or sand, place it in a labelled waste container and dispose of it through an approved waste contractor in accordance with local regulations. Do not flush it to drains. Contaminated absorbent should not be allowed to stand in contact with strong oxidisers.
Packaging is normally a lined steel or high-density polyethylene drum for bulk quantities, with smaller aluminium or HDPE bottles for sample and development quantities. Containers should carry the standard handling marks for chemical packaging and transport, and the batch number, net weight, production date and retest date should be legible on the label. Transport classification follows the flash-point and hazard criteria of the applicable road, rail and sea codes; as a non-flammable, non-corrosive liquid the material is normally shipped as a general chemical cargo.
Procurement and Incoming Inspection Checklist
For a buyer setting up a supply agreement, five acceptance criteria cover most of the risk. Confirm the identity of the lot by gas chromatography against an authentic reference standard and record the retention time and the peak purity. Confirm water content by Karl Fischer titration. Confirm that the odour of the lot matches the reference retained from the original approval sample, because discolouration and odour drift are the first visible signs of oxidative ageing. Confirm that the colour of the lot is within the agreed visual range. Confirm that the packaging, labelling and documentation set is complete, including the safety data sheet in the language required by the destination market.
It is equally useful to agree in writing what the material is not. Vanillyl butyl ether is not vanillin and cannot be substituted for it on a weight-for-weight basis in a fragrance formula; it is not a capsaicinoid and should not be evaluated against the pungency thresholds used for that family; and it does not generate heat chemically, so it cannot support a claim of a measured increase in skin temperature. Writing these boundaries into the technical agreement prevents most of the disputes that arise when a warming agent is purchased on price alone.
FAQ
Q: What are the CAS number, molecular formula and molecular weight of vanillyl butyl ether?
Vanillyl butyl ether is CAS 82654-98-6, molecular formula C12H18O3, molecular weight 210.27 g/mol, and its INCI name is Vanillyl Butyl Ether. The chemical name is 4-(butoxymethyl)-2-methoxyphenol.
Q: How is vanillyl butyl ether different from vanillin and vanillyl ethyl ether?
All three share a 2-methoxyphenol core but behave differently. Vanillin (CAS 121-33-5) is a volatile, high-impact flavouring and fragrance aldehyde; vanillyl alcohol (CAS 498-00-0) is a crystalline intermediate; vanillyl ethyl ether is the shorter-chain homologue with a milder and shorter-lived warming effect. Vanillyl butyl ether is chosen for a slow-onset, long-lasting warmth with low pungency.
Q: What is the typical use level of vanillyl butyl ether in a cosmetic formulation?
In leave-on skin products it is commonly used between about 0.05% and 0.5%, adjusted to the desired onset time and the sensitivity of the consumer group. It is added to the oil phase of an emulsion or dissolved in the alcohol or glycol carrier of an anhydrous gel.
Q: Is vanillyl butyl ether soluble in water and how should it be incorporated?
It is practically insoluble in water and readily soluble in ethanol, isopropanol and cosmetic oils. It should be dissolved in the oil phase before emulsification or in the anhydrous carrier, not added to the aqueous phase, and it should be kept away from strong alkali because the free phenolic hydroxyl forms salts under alkaline conditions.
Q: Does vanillyl butyl ether burn or irritate the skin like capsaicin?
No. Its sensory effect is mediated through the same receptor family as capsaicinoid pungent compounds, but the onset is slower and the intensity far lower, which is why it is described as a mild warming agent. Capsaicin (CAS 404-86-4) and nonivamide (CAS 2444-46-4) produce rapid, intense heat and require much tighter dosing and labelling controls.
Q: How should vanillyl butyl ether be stored and how long does it remain in specification?
Store it tightly closed, protected from light, in a cool dry area away from strong oxidisers and strong alkalis. An unopened container normally remains within specification for at least twenty-four months; the certificate of analysis should state the retest date, and retain samples should be kept for comparison of colour and odour over the shelf-life period.
Q: Which documents should accompany a shipment of vanillyl butyl ether?
A safety data sheet prepared to the ISO 11014 structure with the applicable GHS classification, a certificate of analysis covering assay by gas chromatography, water content by Karl Fischer titration and heavy metals, and for cosmetic use an INCI declaration plus the supporting information needed for the product information file required in the destination market.





