Compound Identity and Chemical Overview
Trimethylsilyl trifluoromethanesulfonate is a moisture-sensitive organosilicon reagent registered as CAS 27607-77-8, with the molecular formula C4H9F3O3SSi and a molecular weight of 222.25 g/mol. Purchasing documents, laboratory notebooks and technical literature refer to the same substance under several equivalent names: trimethylsilyl triflate, trifluoromethanesulfonic acid trimethylsilyl ester, and the widely used abbreviation TMSOTf. Structurally the molecule is a trimethylsilyl group bonded through an oxygen atom to a trifluoromethanesulfonyl group, which makes it the silyl ester of trifluoromethanesulfonic acid, itself registered as CAS 1493-13-6.
The distinctive reactivity of the compound follows from two features working together. The silicon centre carries three electron-donating methyl groups yet remains strongly electrophilic, so it is attacked readily by oxygen, nitrogen and carbon nucleophiles, including enolates, alcohols, carboxylic acids and amines. The triflate group that departs in those reactions is an exceptionally weakly coordinating, heavily stabilised anion derived from one of the strongest simple organic acids known, and it is this low nucleophilicity that separates the reagent from cheaper silyl halides. For a user the practical consequence is an activating and silylating agent that performs under mild conditions and leaves a non-nucleophilic by-product, rather than a stream of corrosive hydrogen halide that must be captured and disposed of.
Because the silicon-oxygen bond hydrolyses rapidly in the presence of water, the material is handled throughout its life cycle as a moisture-sensitive specialty chemical rather than as an ordinary solvent. It is manufactured, packaged, shipped and stored under dry inert conditions, and the residual water content of a batch is treated as a governing quality parameter alongside assay. The substance shows no oxidising, explosive or self-reactive behaviour, but the combination of flammability, corrosivity generated on hydrolysis, and a strong irritant and lachrymatory character shapes essentially every handling rule discussed in the sections that follow.
Physical and Chemical Properties
The values below are the typical values quoted for the bulk liquid in technical data sheets and in the primary literature. They are indicative ranges rather than fixed physical constants; the specification window of the exact grade being purchased should always be confirmed on the certificate of analysis before process design is finalised.
| Property | Typical value or description |
|---|---|
| Registry number | CAS 27607-77-8 |
| Molecular formula | C4H9F3O3SSi |
| Molecular weight | 222.25 g/mol |
| Appearance | Clear, colourless to pale yellow liquid, fuming in moist air |
| Boiling point | Approximately 77 degrees C at 760 mmHg (decomposes on prolonged heating) |
| Density | Approximately 1.23 g/cm3 at 25 degrees C |
| Refractive index | Approximately 1.365 at 20 degrees C |
| Flash point | Approximately 38 degrees C by closed cup, indicating a combustible rather than a highly volatile liquid |
| Reaction with water | Rapid hydrolysis releasing trifluoromethanesulfonic acid and trimethylsilanol |
| Solubility | Miscible with dichloromethane, tetrahydrofuran, acetonitrile, toluene and aliphatic hydrocarbons |
| Storage | Cool, dry, inert-gas blanketed, protected from moisture and from alkaline materials |
The hydrolysis pathway dominates shelf-life behaviour. In contact with water the triflate ester cleaves at the silicon-oxygen bond to give trifluoromethanesulfonic acid, which is a very strong acid, together with trimethylsilanol, which condenses to hexamethyldisiloxane. A batch that has absorbed moisture therefore shows a rising free-acid value, falling pH, increasing colour and a progressive loss of assay. Because the acid produced is involatile in relation to the ester, moisture ingress during storage is not self-correcting and quality declines monotonically.
Compatibility follows the same logic. Dry, neutral organic media are suitable. Strong bases, alkaline aqueous solutions, alcohols in the presence of adventitious water, amines and oxidising agents accelerate decomposition or trigger it outright. Metals and ordinary carbon steel should not be relied upon for long-term contact because hydrolysis generates free acid; glass, glass-lined steel and fluoropolymer-lined surfaces are the conventional construction materials for vessels, pumps and transfer lines. The compound is thermally fragile in the sense that prolonged heating, particularly under reduced pressure where the boiling point is lowered for distillation, must be conducted with strict time limits to limit decomposition.
The liquid has a high vapour pressure relative to its molecular weight, so headspace control matters. Even brief exposure of an open container to air on a humid day produces visible fuming and a measurable increase in free acid, which is why transfer operations are normally performed under nitrogen or argon inside a ventilated enclosure.
Commercial Grades and Specification Windows
Two purity bands dominate the market. A general synthesis grade is adequate for bulk organic transformations where the reagent is used in excess and the product is purified downstream. A high-purity grade is specified where the reaction is sensitive to free acid, where trace metals matter, or where the reagent is used as a promoter in the manufacture of an active pharmaceutical ingredient and the impurity profile must be defended in a regulatory filing. Typical contract windows for the two bands are shown below; individual producers may narrow or widen these limits, and the certificate of analysis governs.
| Parameter | General synthesis grade | High-purity grade |
|---|---|---|
| Assay by GC (area or internal standard) | Not less than 98.0 percent | Not less than 99.0 percent |
| Water by Karl Fischer | Not more than 0.10 percent | Not more than 0.05 percent |
| Free trifluoromethanesulfonic acid | Not more than 1.0 percent | Not more than 0.5 percent |
| Colour on the platinum-cobalt scale | Not more than 150 | Not more than 50 |
| Chloride, as ion | Not more than 500 mg/kg | Not more than 100 mg/kg |
| Appearance | Clear, free from suspended matter | Clear, colourless to faint yellow |
Two specification points deserve emphasis during supplier qualification. First, the free-acid limit is not cosmetic; a high free-acid value consumes base in the intended reaction, disturbs stoichiometry and can racemise or degrade acid-sensitive substrates. Second, the colour specification is a proxy for thermal history and hydrolytic degradation, so a batch supplied at the edge of the colour limit is often already partly degraded even when the assay figure looks acceptable.
Manufacture, Process Control and Quality Testing
Industrially the ester is produced by reacting trifluoromethanesulfonic acid with a trimethylsilyl donor such as trimethylsilyl chloride or hexamethyldisilazane. The reaction generates a volatile by-product that must be captured, and the crude product is then purified by distillation. Because both the feedstock acid and the finished ester are aggressive toward moisture and toward many metals, the manufacturing train is built from corrosion-resistant materials, kept under a dry inert blanket, and monitored continuously for water content. Reaction and purification steps are carried out under conditions that limit thermal exposure, since extended heating degrades the ester and raises colour and free acid simultaneously.
From a quality-control perspective, the analytical package normally applied to a released batch includes the following. Assay is determined by gas chromatography with flame ionisation detection against an external or internal standard, which also quantifies the volatile impurities carried through from the synthesis. Identity is confirmed by mass spectrometry and by nuclear magnetic resonance spectroscopy, where the proton, fluorine-19 and silicon-29 signals together give an unambiguous fingerprint of the trimethylsilyl and trifluoromethyl environments. Residual water is measured by coulometric Karl Fischer titration in accordance with GB/T 6283. Free acid is determined by titration with a standardised sodium hydroxide solution prepared under GB/T 601. Chloride is measured by ion chromatography or by potentiometric titration. Colour is judged on the platinum-cobalt scale following ISO 6271. Sampling follows the general principles of GB/T 6678, and transport packaging carries the pictograms and handling marks defined in GB/T 191.
For high-purity and electronic-adjacent applications, the analytical package is extended with inductively coupled plasma mass spectrometry for trace metals and with a check for non-volatile residue, because these parameters influence performance in sensitive catalysis and in materials applications even when they do not affect the main assay figure.
Industrial and Pharmaceutical Applications
The reagent is best understood as a strong, selective silylating and activating agent rather than as a bulk solvent. Its commercial importance rests on a small number of high-value transformation classes.
The first is enol chemistry. Reaction with ketones, esters and amides in the presence of a tertiary amine base converts them into silyl enol ethers and silyl ketene acetals. These enol derivatives are isolable, distillable intermediates that can be stored and then used in a subsequent carbon-carbon bond-forming step with controlled regiochemistry. The weakly coordinating triflate anion is the reason the silylation is clean: unlike a halide, it does not compete as a nucleophile, so side reactions that would return the substrate to its ketone form are suppressed.
The second is carbohydrate and nucleoside chemistry. In oligosaccharide assembly, the reagent activates glycosyl donors by generating a reactive oxocarbenium-like species or by silylating the leaving group, enabling stereoselective formation of glycosidic bonds under conditions mild enough to preserve protecting groups. The same activating behaviour is exploited in the preparation of nucleoside analogues and other acid-sensitive intermediates used in pharmaceutical manufacturing.
The third is protecting-group management. Trimethylsilyl protection of alcohols and phenols, and the corresponding selective deprotection, are classical operations in multi-step synthesis, and the reagent is one of the reagents of choice when the substrate contains functional groups that would not survive harsher silylating conditions. Related uses include promotion of acetal and ketal formation, activation of carbonyl groups toward nucleophilic addition, and Lewis-acid-mediated transformations such as aldol additions, Mannich-type reactions and certain rearrangements.
Beyond fine chemicals, the reagent finds use as an initiator or co-initiator in controlled cationic polymerisation of vinyl ethers and related monomers, where the weakly nucleophilic counter-ion permits a living character that is difficult to obtain with conventional Lewis acids. This application has driven demand for very low water and very low free-acid material, because traces of either terminate or uncontrolled-accelerate the growing chain.
Upstream, the position of the compound in the value chain is simple: it sits above trifluoromethanesulfonic acid and the trimethylsilyl donors, both mature industrial commodities, and below pharmaceutical, agrochemical and specialty polymer manufacturing. Downstream consumers are typically fine-chemical plants, contract research organisations and research laboratories rather than general industry, and the volumes involved are correspondingly small in tonnage terms but high in value and in specification sensitivity.
In every one of these uses the reagent is consumed stoichiometrically or catalytically in a closed, engineered process. Detailed preparation parameters, addition sequences and scale-up conditions are process-specific know-how and are outside the scope of a properties review; what matters commercially is that the material arrives dry, with a low free-acid value, and with a documented analytical package.
Comparison with Related Silyl Reagents and Triflates
Selection between this reagent and its neighbours is normally decided by the required electrophilicity, the acceptable by-product stream and the cost of the anion. The table summarises the practical differences.
| Reagent | CAS number | Practical character | Typical role |
|---|---|---|---|
| Trimethylsilyl trifluoromethanesulfonate | 27607-77-8 | Highly electrophilic silicon, essentially non-nucleophilic by-product | Enol silylation, glycoside and nucleoside activation, Lewis-acid promotion, cationic polymerisation initiating systems |
| Trimethylsilyl chloride | 75-77-4 | Cheaper and widely used, but the leaving chloride is nucleophilic and the reaction liberates hydrogen chloride | Routine TMS protection, silylation in robust systems |
| Trimethylsilyl iodide | 16029-98-4 | Highly reactive, light and moisture sensitive | Ether and ester cleavage, iodide introduction |
| Trifluoromethanesulfonic acid | 1493-13-6 | Very strong Brønsted acid, non-nucleophilic anion | Acid catalysis, precursor to triflate esters |
| Hexamethyldisilazane | 999-97-3 | Mild silyl donor with base character | TMS protection, surface priming |
The general rule of thumb is that moving from the chloride to the triflate buys a much weaker nucleophile and therefore fewer competing pathways, at a substantially higher unit cost. That trade-off is justified when the substrate is expensive, when stereochemical integrity must be preserved, or when residual halide in the final product is unacceptable. Where none of those constraints applies, the simpler and cheaper silyl chloride usually remains the rational choice, and buyers should resist specifying the triflate as a default.
Safety, Storage, Transport and Regulatory Compliance
Hazard communication for the substance is dominated by two endpoints. It is classified as a flammable liquid, with the corresponding flammable-liquid and vapour hazard statement H226, and it is classified as corrosive to skin and severely damaging to eyes, associated with hazard statement H314, an assessment driven largely by the strong acid generated on contact with moisture and tissue. The vapour is irritating to the respiratory tract and to mucous membranes, and the liquid is lachrymatory, so any operation that could produce an aerosol must be carried out with local exhaust ventilation and eye protection that includes a face shield rather than goggles alone. The recommended personal protective equipment is a chemically resistant apron or suit, gloves made of butyl rubber or a fluoropolymer laminate rather than thin disposable latex, and the standard complement of safety shower and eyewash facilities in the immediate work area.
Engineering controls take priority over personal protection. Transfer and dispensing are performed in a fume hood or a closed transfer system under dry nitrogen. Because the material fumes in moist air, open handling in a humid environment is both a quality risk and an exposure risk. Spill response uses dry inert absorbent, never water, because adding water liberates the strong acid and accelerates fuming; the resulting absorbent is treated as corrosive waste. Firefighting uses dry chemical, carbon dioxide or alcohol-resistant foam, and water spray should be used only to cool unaffected containers rather than to extinguish burning product. Containers must be kept closed, upright and away from ignition sources, oxidisers and alkalis.
Storage recommendations follow the same pattern: a cool, dry, well-ventilated, fire-rated area, below ambient where possible, with nitrogen blanketing or an inert gas pad on opened containers, and with segregation from bases, amines, oxidising agents and water sources. Drums and small containers are normally lined with fluoropolymer or supplied in fluorinated plastic packaging, and shelf life is defined by the supplier on the basis of retained water and free-acid values. Re-testing before use is standard practice for material held longer than the stated shelf life.
For transport, the material is consigned under the entry for a corrosive liquid with a flammable subsidiary risk in the UN Model Regulations, meaning it is subject to the corrosive liquid classes and packing instructions of ADR for road, IMDG for sea and IATA for air, with the associated labelling, documentation and packaging requirements. Outside the transport framework, the substance is handled under the general chemical-management regime that applies to industrial chemicals: safety data sheets prepared on the model described in ISO 11014, labels complying with the Globally Harmonised System, and registration and inventory obligations under the chemical control legislation of the jurisdiction of manufacture and of import. The responsible procurement step is to obtain, for each batch, a safety data sheet whose revision date is current, a certificate of analysis covering the parameters listed in the specification window, and confirmation that the packaging and marking meet the transport requirements for the destination country.
A final practical point concerns waste and residues. Because the hydrolysis product is a persistent, highly mobile strong acid that is not readily degraded, spent absorbents, distillation residues and equipment washings should be segregated and routed to an authorised treatment route for acidic halogenated-adjacent waste rather than discharged with ordinary chemical waste.
FAQ
Q: What is the CAS number and molecular formula of trimethylsilyl trifluoromethanesulfonate?
The compound is CAS 27607-77-8, with the molecular formula C4H9F3O3SSi and a molecular weight of 222.25 g/mol. It is also described as trimethylsilyl triflate or TMSOTf, and it is the trimethylsilyl ester of trifluoromethanesulfonic acid, CAS 1493-13-6.
Q: Why is water content specified so tightly on the certificate of analysis?
The silicon-oxygen bond hydrolyses rapidly, releasing trifluoromethanesulfonic acid and trimethylsilanol. Every unit of absorbed water therefore converts assay into free acid, raises colour and consumes base in the intended reaction. Typical contract limits are not more than 0.10 percent water for a general synthesis grade and not more than 0.05 percent for a high-purity grade, both measured by Karl Fischer titration.
Q: How should the reagent be stored and dispensed?
Store it cool, dry and under an inert gas blanket, segregated from bases, amines, oxidising agents and any water source. Dispense in a fume hood or closed transfer system, keep containers closed between uses, and re-test water and free-acid values before using material held beyond the stated shelf life.
Q: Which analytical methods are used to release a batch?
Assay is measured by gas chromatography with flame ionisation detection, identity is confirmed by mass spectrometry and by proton, fluorine-19 and silicon-29 nuclear magnetic resonance, residual water is determined by coulometric Karl Fischer titration under GB/T 6283, free acid is titrated with standardised sodium hydroxide prepared under GB/T 601, chloride is determined by ion chromatography, and colour is judged on the platinum-cobalt scale per ISO 6271.
Q: How does it differ from trimethylsilyl chloride in practice?
Both deliver a trimethylsilyl group, but the triflate leaving group is far less nucleophilic than chloride, so competing side reactions are suppressed and the by-product does not return the substrate to its starting form. The trade-off is cost and moisture sensitivity. Choose the triflate when the substrate is valuable, stereochemistry must be preserved or residual halide is unacceptable, and the chloride when none of those constraints applies.
Q: What personal protective equipment is required during handling?
At minimum, chemical splash goggles supplemented by a face shield, impervious gloves of butyl rubber or a fluoropolymer laminate, and a chemically resistant apron or suit, used inside a fume hood with local exhaust ventilation. Safety shower and eyewash facilities must be available immediately, and spill kits must contain dry inert absorbent rather than water-based neutralisers.





