2,4-Diamino-6-hydroxypyrimidine CAS 56-09-7: Properties and Uses

Dec 11, 2024 Leave a message

Identity and Chemical Nature of 2,4-Diamino-6-hydroxypyrimidine

2,4-Diamino-6-hydroxypyrimidine is a small, densely functionalised heterocycle built on a six-membered pyrimidine ring that carries amino groups at positions 2 and 4 and a hydroxyl group at position 6. It is registered under CAS 56-09-7, has the molecular formula C4H6N4O and a molecular weight of 126.12. The molecule can be drawn in two equivalent ways: as the hydroxy form, with a hydroxyl group on the ring, and as the oxo or lactam form, in which the hydrogen sits on the ring nitrogen and the oxygen becomes a carbonyl, giving 2,4-diamino-6(1H)-pyrimidinone. Both descriptions refer to the same compound, and the balance between the two tautomers depends on the medium and on the state of the solid.

In the biochemical literature the compound is usually abbreviated DAHP, and that abbreviation reflects its best-known role as an inhibitor of GTP cyclohydrolase I. This dual identity, as an organic building block and as a laboratory research tool, shapes the way the material is bought and specified. A synthesis customer cares about assay, impurity profile and metal content; a life-science customer cares about solubility behaviour, lot-to-lot reproducibility and the absence of interfering impurities.

Because the ring carries four nitrogen atoms in a compact structure, the compound is also interesting as a precursor for further heterocyclic chemistry. Its amino groups can be acylated or alkylated, the ring can be substituted, and the hydroxyl or oxo group provides a handle for forming ethers, esters and salts. That dense functionality on a small scaffold is the reason the material appears so often in route-scouting work.

Physical and Chemical Properties

The commercial product is a white to very pale yellow crystalline powder. It is a high-melting solid that decomposes rather than melting cleanly, with decomposition in the region of 280 degrees Celsius. The compound is weakly basic: it is protonated by acids to give crystalline salts, and it is close to neutral in pure water, where solubility is limited. Polar aprotic solvents such as dimethyl sulfoxide dissolve it well, and dilute mineral acid gives clear solutions that are convenient for analytical work. It is practically insoluble in hydrocarbons and in chlorinated solvents.

Two practical consequences follow. First, because the compound is only slightly soluble in water at neutral pH, dissolution for assay or for biological work is normally carried out in dilute acid or in a polar aprotic solvent, and the solvent chosen must be stated in the analytical procedure so that results remain comparable between laboratories. Second, because the solid takes up moisture to a modest degree and the free base form is readily protonated, exposure to acidic vapours or to acid residues in shared drying ovens can contaminate a batch. Dedicated drying and milling equipment is therefore a reasonable expectation of a production site serving regulated customers.

Parameter Typical value or description
Chemical name 2,4-Diamino-6-hydroxypyrimidine
Alternative names 2,4-diamino-6(1H)-pyrimidinone; DAHP in the biochemical literature
CAS Registry Number 56-09-7
Molecular formula C4H6N4O
Molecular weight 126.12 g/mol
Appearance White to very pale yellow crystalline powder
Melting behaviour Decomposes on heating in the region of 280 degrees Celsius without a clean melt
Solubility Slightly soluble in water; soluble in dilute mineral acid and in dimethyl sulfoxide; practically insoluble in nonpolar organic solvents
Acid-base character Weakly basic; forms crystalline salts with acids
Nitrogen content Four nitrogen atoms per molecule, giving a distinctive elemental analysis figure for the pure substance

The values above describe typical commercial material and are intended as a guide to specification negotiation rather than as fixed constants. The certificate of analysis issued for the delivered batch, against the specification agreed with the buyer, is the governing document.

GTP Cyclohydrolase I Inhibition and the Tetrahydrobiopterin Connection

The most widely documented biological property of 2,4-diamino-6-hydroxypyrimidine is its action as an inhibitor of GTP cyclohydrolase I, the first and rate-limiting enzyme in the de novo biosynthesis of tetrahydrobiopterin, usually abbreviated BH4. By blocking that step, the compound lowers intracellular BH4 concentrations in cells and tissue preparations, which in turn affects the enzymes that depend on BH4 as a cofactor, including the nitric oxide synthases and the aromatic amino acid hydroxylases that act on phenylalanine, tyrosine and tryptophan.

That mechanism explains why the material appears repeatedly in biochemistry and pharmacology research. It is used to deplete BH4 deliberately and then to observe the consequences for nitric oxide production, for neurotransmitter synthesis and for oxidative stress responses. It is also used to probe the coupling state of nitric oxide synthase enzymes and to study endothelial and neuronal signalling in vitro. These are laboratory research applications: the compound is supplied as a chemical intermediate and research reagent, not as a therapeutic product, and it should not be presented or handled as a medicine.

For a producer, the practical consequence is a demand for small, well-characterised lots with excellent batch-to-batch consistency. A change of a few tenths of a percent in chromatographic purity can shift the apparent potency measured in an inhibition experiment, so customers in this segment typically ask for a full chromatogram, an assigned identity dataset and a statement of the impurity profile rather than for a single assay figure alone.

Grades, Specifications and Analytical Control

Two grades are common in the market: a standard grade of 98.0 percent minimum, used for general organic synthesis, and a higher grade of 99 percent that is preferred for biochemical and analytical applications. Specification is agreed case by case. Typical control points are assay, identity, water content, residue on ignition, heavy metals, individual related substances and the appearance of a standard solution. Water is determined by Karl Fischer titration following the general procedure of GB/T 6283; standard volumetric solutions used in any titration step are prepared in line with GB/T 601; sampling follows the general principles of GB/T 6678; and packaging markings follow GB/T 191.

Test item Typical method Typical limit
Assay on dry basis High-performance liquid chromatography with ultraviolet detection against an external standard 98.0 percent minimum
Identity Infrared spectroscopy and proton nuclear magnetic resonance Conforms to reference data
Elemental check Elemental analysis of carbon, hydrogen and nitrogen Consistent with C4H6N4O
Water content Karl Fischer titration, general procedure of GB/T 6283 0.5 percent maximum
Residue on ignition Gravimetric after controlled ashing 0.2 percent maximum
Heavy metals Colorimetric determination or inductively coupled plasma measurement 10 mg/kg maximum
Individual related substances Chromatographic area percentage at the assay wavelength 0.5 percent maximum for each impurity
Appearance of solution Visual inspection of a solution prepared in dilute acid Clear, colourless to pale yellow

Because the compound is a nitrogen-rich heterocycle with strong ultraviolet absorption, reversed-phase high-performance liquid chromatography with ultraviolet detection is the standard assay technique and gives good sensitivity for related substances as well. Identity is confirmed by infrared spectroscopy and proton nuclear magnetic resonance, with elemental analysis or mass spectrometry where a formal structural confirmation is required. A nitrogen determination is a useful cross-check, since the four nitrogen atoms in the molecule give a distinctive figure for pure material and a low result may indicate hydration or inorganic contamination.

Position in the Pharmaceutical and Fine Chemical Value Chain

The compound sits at the building-block end of the pharmaceutical value chain. It is a small, densely functionalised pyrimidine that can be elaborated in several directions, so it is purchased by process chemistry groups as a starting material for heterocyclic targets and by contract research organisations as a reference compound. Its amino groups can be acylated or alkylated, the ring can be substituted further, and the hydroxyl or oxo group provides a handle for forming ethers, esters and salts. Because these are routine manipulations in pyrimidine chemistry, the material is often ordered in kilogram quantities for route scouting and in smaller amounts for feasibility studies.

Alongside that, the compound is a recognised research reagent in the tetrahydrobiopterin field, and suppliers serving this segment need documentation to support it: a certificate of analysis showing actual measured values, a safety data sheet in the sixteen-section format of ISO 11014, and a stability statement covering the recommended storage condition. In regulated applications the absence of animal-derived materials and a defined traceability chain from the batch record back to the raw materials are frequently requested as part of supplier qualification.

Handling, Storage, Safety and Regulatory Considerations

The substance is handled as an irritant solid. Dust generation should be minimised, local exhaust ventilation should be used at the point of weighing and charging, and operators should wear protective gloves, eye protection and a laboratory coat. Where airborne dust cannot be controlled by engineering means, respiratory protection suited to the exposure assessment should be worn. Good housekeeping matters because fine powders of nitrogen-rich heterocycles disperse easily and settle on surfaces.

Store the material in closed containers in a cool, dry, well-ventilated place, away from strong acids, strong oxidising agents and sources of ignition. Protect it from moisture and from acidic vapours, and keep it away from direct light if the packaging is not opaque. Under these conditions a shelf life of two years from the date of manufacture is a common commercial statement, with retesting before use after that period. Typical packaging is a 25 kg fibre drum with a polyethylene liner for bulk quantities, and a smaller sealed container for research amounts.

For transport, the product is not normally classified as dangerous goods in standard packaging, but the classification should always be taken from the current safety data sheet and from the applicable modal regulation rather than inferred. On the regulatory side, the substance is not a controlled narcotic or psychotropic material, and no explosives-precursor listing applies to it in the major jurisdictions. Chemical inventory obligations in the destination market, including REACH registration in the European Union and TSCA listing in the United States, apply in the usual way, and buyers in regulated sectors should confirm registration status for their own market before the first delivery.

FAQ

Q: What is the CAS number, formula and molecular weight of 2,4-diamino-6-hydroxypyrimidine?
The substance is CAS 56-09-7, with the molecular formula C4H6N4O and a molecular weight of 126.12. It is also written as 2,4-diamino-6(1H)-pyrimidinone, and it is abbreviated DAHP in biochemical publications.

Q: Why is the compound abbreviated DAHP, and what does it do in laboratory work?
DAHP stands for 2,4-diamino-6-hydroxypyrimidine. It is a well-documented inhibitor of GTP cyclohydrolase I, the rate-limiting enzyme in tetrahydrobiopterin biosynthesis. Researchers use it to lower cellular BH4 levels and then study the effects on nitric oxide synthases and on aromatic amino acid hydroxylases.

Q: What purity grades are normally offered?
A 98.0 percent minimum grade on a dry basis serves general synthesis, and a 99 percent grade is preferred for biochemical and analytical use. Assay is determined by high-performance liquid chromatography with ultraviolet detection against an external standard.

Q: How is the material dissolved for analysis or for cell work?
Solubility in neutral water is limited, so dilute mineral acid or a polar aprotic solvent such as dimethyl sulfoxide is normally used. The solvent must be specified in the analytical procedure so that results stay comparable between laboratories.

Q: What are the recommended storage conditions?
Keep containers closed in a cool, dry, well-ventilated place, away from strong acids, strong oxidisers and ignition sources. Protect the material from moisture and acidic vapours. A two-year shelf life from the date of manufacture is typical, with retesting before use after that period.

Q: Is this compound a pharmaceutical product or an intermediate?
It is a fine chemical intermediate and research reagent, not a therapeutic product. It is supplied as a building block for heterocyclic synthesis and as a reference compound for laboratory studies, and it should not be presented or handled as a medicine.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry