What Is Cyclopentylamine?
Cyclopentylamine (synonyms: cyclopentanamine, aminocyclopentane, 1-aminocyclopentane) is a saturated monocyclic primary amine built on a five-membered carbocyclic ring. It is a colourless to pale yellow, low-viscosity liquid with a pungent ammoniacal odour, and it belongs to the same homologous family as cyclopropylamine, cyclobutylamine, cyclopentylamine and cyclohexylamine. The ring carbon that carries the amino group is the only reactive centre for acylation, alkylation and salt formation, while the fully saturated ring supplies lipophilicity without the aromatic reactivity of aniline-type amines.
Its identity parameters are fixed and verifiable: CAS Registry Number 1003-03-8, molecular formula C5H11N, molecular weight 85.15 g/mol. Because the molecule is a strong organic base (the pKa of its conjugate acid is approximately 10.6), it forms stable salts with mineral and organic acids, dissolves readily in water to give an alkaline solution, and is fully miscible with alcohols, ethers, ketones and most polar organic solvents.
For buyers, the practical consequence of that structure is simple: cyclopentylamine is a versatile building block rather than a finished performance chemical. It is purchased for what it becomes downstream - the amide, sulfonamide, carbamate, urea, N-alkyl or imine fragment that carries the cyclopentyl group into a pharmaceutical, agrochemical or specialty industrial molecule.
Identity and Physicochemical Properties
The data below are the parameters that determine process design, drum-handling procedures and analytical acceptance limits. They are the properties most frequently requested on a technical data sheet and verified on an incoming certificate of analysis.
| Parameter | Typical value / range | Practical meaning |
|---|---|---|
| CAS Registry Number | 1003-03-8 | Single-registration identity used for inventory and customs checks |
| Molecular formula | C5H11N | Primary aliphatic amine, one replaceable N–H pair plus one active hydrogen |
| Molecular weight | 85.15 g/mol | Drives molar-charge calculations; the hydrochloride forms near 1:1 by mole |
| Appearance | Clear, colourless to pale yellow liquid | Progressive yellowing is an oxidation/CO2 uptake indicator |
| Odour | Strong ammoniacal, amine-like | Odour threshold is low; containment is a workplace-air issue |
| Boiling point | 106–108 °C at 101.3 kPa | Allows atmospheric or light-vacuum distillation; limits drying by heat alone |
| Relative density | Approximately 0.87 (20 °C) | Floats on water; phase separation in aqueous washes must be designed accordingly |
| Refractive index | Approximately 1.4478 (20 °C) | Common in-house identity check alongside density |
| Basicity | Conjugate-acid pKa near 10.6 | Stable salts with acids; easy extraction into dilute acid and back-extraction with base |
| Solubility | Readily soluble in water; miscible with ethanol, ether and other polar solvents | Supports aqueous reaction media and simple aqueous work-ups |
| Reactivity | N-acylation, N-alkylation, reductive amination, salt formation, ring substitution on the cyclopentane carbon | Core of its use as an intermediate scaffold |
| Flammability | Flammable liquid with a low flash point (below 23 °C closed cup is characteristic of this boiling range) | Bonded and grounded transfer lines, nitrogen padding, no open flames |
Two behaviour patterns deserve attention in plant design. First, like other low-molecular-weight primary amines, cyclopentylamine reacts with carbon dioxide from air to form the corresponding carbamate/carbonate, which shows up as haze, a rise in non-volatile residue and a downward drift in assay. Second, the vapour is heavier than air and migrates along floors and trenches, so local exhaust ventilation at the drum bung, pump seal and sampling point is the correct primary control.
Grades and Commercial Specifications
Cyclopentylamine is supplied mainly as a technical/industrial grade and as a higher-purity grade for pharmaceutical and agrochemical synthesis. The difference between the two is not the main assay alone but the profile of trace impurities that can carry through a multi-step route.
| Specification item | Industrial grade | High-purity / synthesis grade |
|---|---|---|
| Assay (cyclopentylamine, GC-FID, external standard) | ≥ 99.0% w/w | ≥ 99.5% w/w |
| Water (Karl Fischer) | ≤ 0.3% w/w | ≤ 0.1% w/w |
| Colour (Hazen / APHA) | ≤ 50 | ≤ 20 |
| Cyclopentanone and cyclopentanol | Reported, typically ≤ 0.3% | ≤ 0.1% |
| Secondary amine (dicyclopentylamine) | Reported, typically ≤ 1.0% | ≤ 0.3% |
| Non-volatile residue | ≤ 0.1% | ≤ 0.05% |
| Packaging | 160–180 kg net steel or lined HDPE drums; 1000 kg IBC; ISO tank for bulk | Smaller lined drums or nitrogen-padded containers |
The dicyclopentylamine figure matters in pharmaceutical work because secondary amines compete with the primary amine in acylation and alkylation steps; a tighter secondary-amine limit at the point of order is therefore a real cost, not a catalogue formality. Buyers qualifying a source should ask for the test method behind each number, not only the number, because an assay obtained by titration (total amine value) and an assay obtained by GC can differ by a few tenths of a percent without either being wrong.
Manufacturing and Process Positioning
Commercially, cyclopentylamine is produced from cyclopentane-based feedstocks by introducing nitrogen at a single ring carbon. Two industrially established families of routes are used: reductive amination of cyclopentanone with ammonia over a hydrogenation catalyst, and hydrogenation/deoxygenation of pre-formed nitrogen intermediates such as the cyclopentanone oxime. Both are classic amine-manufacture operations rather than exotic chemistry, which is why the commercial market is stable and why impurity control rather than novelty is the competitive differentiator.
From a supply-chain standpoint the relevant points are:
• Raw-material linkage. Cyclopentanone pricing and availability feed directly into cyclopentylamine cost; buyers should track the upstream ketone market rather than the amine quotation alone.
• Isomer purity. A five-membered ring has no positional isomers for a single substituent, so the principal quality risks are unreacted ketone/alcohol, over-alkylated secondary amine and water, not structural isomers.
• Distillation cut. Because the boiling point is close to that of water and several low-boiling alcohols, the tail fraction of the distillation determines the residual ketone content; a supplier's ability to hold ≤ 0.1% cyclopentanone is a meaningful qualification criterion.
• Scale and packaging. Bulk volumes are normally shipped in stainless steel road tanks or ISO tanks with nitrogen padding; drums are preferred for small-scale synthesis because they limit the headspace exposed to air and moisture.
Quality Control and Analytical Methods
A workable release programme for incoming cyclopentylamine combines a small number of decisive tests:
• Identity and assay by gas chromatography. Capillary GC with flame-ionisation detection against an external cyclopentylamine standard resolves the main component from cyclopentanone, cyclopentanol, water and dicyclopentylamine in a single run and is the normal primary assay method for this type of aliphatic amine.
• Total amine value by non-aqueous titration. Titration with perchloric acid in acetic acid medium, using standard volumetric solutions prepared and standardised in accordance with GB/T 601, gives a fast cross-check on the chromatographic assay and is the traditional control for reactor charge calculations.
• Water content. Karl Fischer titration, conducted in line with GB/T 6283, is the reference method for residual moisture; water is both a hydrolysis risk for downstream acid chlorides and a contributor to carbamate haze.
• Colour, density and refractive index. Colour measured in Hazen units together with relative density and refractive index provides a cheap, sensitive indication of oxidation and cross-contamination during storage and tank transfers.
• Sampling. Representative sampling of drums and tanks should follow GB/T 6678; for drums, the composite sample is drawn from the top, middle and bottom layers after the contents have been homogenised, because moisture and carbonate tend to concentrate in the upper layer.
Every batch should arrive with a certificate of analysis stating method and limit for each parameter, and the receiving laboratory should re-test at least identity, assay and water before the material is released to the reactor.
Applications in Pharmaceutical and Agrochemical Synthesis
The dominant use of cyclopentylamine is as an amine partner in the construction of more complex molecules. Its value comes from three features that medicinal and agrochemical chemists exploit repeatedly: the ring is purely aliphatic and therefore metabolically robust, the amino group is basic enough to form tight hydrogen bonds and salts, and the five-membered ring is a compact lipophilic group that alters partition behaviour without adding aromatic toxicology concerns.
• Amide, urea and sulfonamide intermediates. Reaction with acid chlorides, anhydrides, isocyanates or sulfonyl chlorides produces N-cyclopentyl amides, ureas and sulfonamides, which are standard fragments in both crop-protection and pharmaceutical development. Amides from cyclopentylamine are typically crystalline, which simplifies purification by recrystallisation.
• N-alkylation and reductive amination. Because the molecule is a primary amine, it can be mono-alkylated or used as the amine component in reductive amination to build secondary and tertiary amines carrying the cyclopentyl substituent. Over-alkylation is the usual process concern, and the secondary-amine limit discussed above becomes a yield issue rather than a specification detail.
• Salt and salt-form screening. The hydrochloride and other acid salts of cyclopentylamine derivatives are commonly evaluated to improve aqueous solubility and crystallinity of an active ingredient; the basicity of the free amine makes salt formation straightforward and reversible.
• Adenosine-receptor and kinase-directed research. N-substituted adenosine analogues bearing cyclopentyl-type substituents are extensively studied in receptor pharmacology, and the cyclopentyl group appears widely in screening libraries as a saturated replacement for cyclohexyl or phenyl.
• Agrochemical intermediates. In crop protection, cyclopentylamine is used to introduce an aliphatic amine function into herbicidal and insecticidal scaffolds, where the resulting amides and ureas contribute both systemic mobility and selectivity.
Note that the compound is an industrial intermediate, not an active substance in its own right: it is supplied against purity specifications and used inside closed or well-ventilated manufacturing operations, and it is not formulated or applied as a crop-treatment product.
Applications in Industrial Chemicals, Coatings and Water Treatment
Beyond fine-chemical synthesis, the same reactivity profile supports a set of lower-profile but commercially significant uses.
• Corrosion inhibition. Aliphatic amines are classic film-forming inhibitors for ferrous surfaces in closed loops, acid picking baths and oilfield fluid systems; the cyclopentyl group improves oil solubility, which helps the inhibitor partition to the metal surface in mixed aqueous-hydrocarbon service.
• Epoxy and curing chemistry. Cycloaliphatic amine building blocks are used to build hardeners and accelerators for ambient-cure epoxy systems, where they influence gel time, pot life and the final glass-transition behaviour of the coating.
• Surfactant and emulsifier intermediates. Amidation of cyclopentylamine with fatty acids, or quaternisation of its derivatives, produces amphiphilic compounds used as emulsifiers, wetting agents and corrosion-inhibiting surfactants in metalworking, textile and cleaning formulations.
• Rubber and polymer additives. Amines of this type are intermediates for accelerators, antioxidants and adhesion promoters in the rubber and polymer industries, where the amine function anchors onto the filler or metal surface.
• Catalyst and ligand synthesis. Cyclopentyl-substituted amines and phosphines are used as ligand components in homogeneous catalysis and as organocatalyst scaffolds, again because the saturated ring resists oxidation and degradation under reaction conditions.
Because these applications depend on a consistent amine value and low water content rather than on ultra-trace purity, industrial-grade material is normally adequate; the selection criterion is the supplier's batch-to-batch consistency over many deliveries, which is verified by statistical review of certificates rather than by a single sample.
Handling, Storage and Transport
Cyclopentylamine is a flammable, strongly basic liquid that is irritating to skin, eyes and the respiratory tract, and it must be managed as such.
• Engineering controls. Local exhaust ventilation at filling points, drum openings and sample ports; closed transfer systems with pumps rather than manual pouring; eyewash and safety shower within immediate reach; explosion-proof electrical equipment in the storage and dispensing zone.
• Personal protective equipment. Chemical splash goggles plus face protection, chemically resistant gloves, and body protection resistant to amines. Respiratory protection with an appropriate cartridge is used for short-duration tasks where ventilation cannot be guaranteed.
• Storage. Keep containers tightly closed in a cool, dry, well-ventilated area away from acids, oxidising agents, acid chlorides and anhydrides. Nitrogen padding and a storage temperature at or below about 30 °C are standard practice. Copper and copper alloys are not suitable wetted materials; stainless steel or lined carbon steel is preferred. A typical shelf life is 12–24 months in unopened, correctly stored drums, subject to re-test of assay and water before use.
• Transport. The product is a corrosive/flammable amine and is normally consigned under the n.o.s. entries for amines - UN 2733 (flammable, corrosive) or UN 2734 (corrosive, flammable) - according to which hazard class is assigned as primary after testing. ADR/IMDG marking, packaging group and the specific UN number are taken from the product safety data sheet and must match the shipping documents exactly.
• Spill response. Absorb small spills with inert material, dilute and neutralise cautiously with dilute acid under ventilation, and prevent entry into drains and watercourses; because the vapour is heavier than air, ignition sources must be removed before clean-up begins.
Regulatory and Compliance Overview
Cyclopentylamine is an industrial chemical subject to the usual inventory and hazard-communication frameworks. In practice, the compliance documents a buyer needs in the file are: a safety data sheet structured according to ISO 11014 with GHS/CLP classification and pictograms; transport classification consistent with ADR/IMDG; inventory listing evidence for the destination markets (for example TSCA in the United States and IECSC in China), and REACH registration evidence for supply into the European Union with the correct registration number quoted by the supplier.
GHS classification for the substance follows from its measured properties rather than from generic assumptions: flammable-liquid classification derived from the measured flash point and initial boiling point, skin/eye hazard classification from standard irritation or corrosion testing, and specific target-organ classification where applicable. The hazard statements, signal word and packing group in the safety data sheet must therefore be traceable to test data, and a supplier who cannot show that traceability should not be approved.
Workplace exposure: as with other volatile primary amines, occupational control is based on airborne concentration limits for amines of this type combined with ventilation and PPE; buyers should obtain the supplier's recommended handling limits and verify them against the limits applicable at their own site.
Purchase and Incoming Inspection Checklist
A concise checklist reduces the risk of rejecting material after it has been charged to a reactor:
1. Identity - CAS 1003-03-8, molecular formula C5H11N and molecular weight 85.15 g/mol confirmed on the certificate and against the drum label.
2. Assay and impurities - GC assay within the agreed limit, with cyclopentanone, cyclopentanol and dicyclopentylamine reported individually rather than lumped into a single unspecified figure.
3. Water - Karl Fischer result within limit, cross-checked in-house on first drums of each delivery.
4. Appearance and colour - clear liquid within the agreed Hazen range, with no haze or sediment that would indicate carbamate formation.
5. Packaging integrity - undamaged drums, correct net weight, nitrogen padding where specified, and bung seals intact on arrival.
6. Documentation - certificate of analysis for the delivered batch number, safety data sheet in the required language, transport papers matching the UN number and packing group, and a retained sample for the agreed retention period.
7. Traceability - batch number on the label, the certificate and the shipping documents must match; mixed-lot deliveries should be either refused or fully segregated and re-tested.
FAQ
Q: What is the CAS number, molecular formula and molecular weight of cyclopentylamine?
Cyclopentylamine is CAS 1003-03-8 with the molecular formula C5H11N and a molecular weight of 85.15 g/mol. It is a saturated five-membered cyclic primary amine, also written as cyclopentanamine or aminocyclopentane.
Q: What are the typical boiling point, density and refractive index of cyclopentylamine?
The boiling point is about 106–108 °C at atmospheric pressure, the relative density is approximately 0.87 at 20 °C, and the refractive index is about 1.4478 at 20 °C. The material is readily soluble in water and miscible with alcohols, ethers and other polar organic solvents.
Q: Which grade should be ordered for pharmaceutical or agrochemical synthesis?
For multi-step synthesis a high-purity grade with assay ≥ 99.5% by GC, water ≤ 0.1% and a secondary-amine content controlled below about 0.3% is normally appropriate, because secondary amine competes in acylation and alkylation steps. Industrial grade with assay ≥ 99.0% is adequate for corrosion-inhibitor and surfactant intermediates.
Q: How is cyclopentylamine assayed and how is moisture determined?
Assay is normally determined by capillary gas chromatography with flame-ionisation detection against an external standard, and cross-checked by non-aqueous titration of the total amine value with perchloric acid using standard solutions prepared per GB/T 601. Water is determined by Karl Fischer titration in accordance with GB/T 6283.
Q: How should cyclopentylamine be stored and how long can it be kept?
Store in tightly closed, nitrogen-padded containers in a cool, dry, well-ventilated area below about 30 °C, away from acids, oxidising agents and acid chlorides. Stainless steel or lined steel is the preferred wetted material. In unopened, properly stored drums a shelf life of 12–24 months is typical, with assay, colour and water re-tested before use.
Q: Is cyclopentylamine a hazardous material for transport, and how is it classified?
Yes. It is a flammable, strongly basic and irritating liquid; amines of this type are consigned under the n.o.s. amine entries, typically UN 2733 or UN 2734, depending on whether the flammable or the corrosive hazard is assigned as primary. The exact UN number, packing group, hazard labels and segregation requirements are taken from the product safety data sheet and must appear on the transport documents.





